Key Features

16*10/100/1000Base-T RJ45 PoE, 8*1G Combo RJ45/SFP, 4*1G/2.5/10GBase-X SFP+ slots

DC/DC Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection

Comply with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard

Support USB one key configuration and upgrading

DI/DO/RS485 are optional

Layer 3 features: Supports static and dynamic routing, RIP, OSPF, BGP4, ECMP, VRRP

Layer 2 features: VLAN; ERPS, STP/RSTP/MSTP; Link aggregation, IGMP snooping, port mirroring

QinQ, 802.1X, port isolation, RMON, NTP client, DHCP snooping/client, Ping/Tracert test, ACL, QoS and SFP DDM function

Management and maintenance: IPv4 and IPv6 management; PoE management

Support Web, SNMP, CLI, Telnet/SSH management method; Support user management, system log, Configuration upload/download through web interface, firmware upgrade via HTTP/TFTP/USB

Support G.8032 ERPS protocol, recovery time ≤20ms

Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection

IP40 fan-less and Din-rail design

Operation temperature: -40℃ ~+75℃

With above features, it is an ideal solution for IP Surveillance, wind, electricity, assembly automation, subway PIS, power SCADA, sewage treatment, metallurgy, intelligent transportation, rail transportation, military and other industries.

Specification

Product Name: 32 port Hybrid Rate Rack Layer 3 Managed Industrial Ethernet PoE++ Switch

Port

16*10/100/1000Base-T RJ45 PoE (1-2 ports support PoE++ 90W)

8*COMBO SFP/RJ45

4*1G/2.5G/10GBase-X SFP+

1*RJ45 Console port(115200,8,N,1)

1*USB 2.0 for configuration and firmware update

Data&Alarm Port(Optional)

1 channel RS485

1 channel DI(digital input)

1 channel DO(digital output)

Network Medium

10BASE-T: Cat 3, 4, 5 or above UTP(≤100 meter)

100BASE-TX: Cat 5 or above UTP (≤100 meter)

1000BASE-TX: Cat5 or above UTP (≤100 meter)

Network Protocol

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Ethernet

IEEE 802.3ab 1000Base-T Ethernet

IEEE 802.3z 1000Base-X Ethernet

IEEE802.3x Flow Control and Back Pressure

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1w Rapid Spanning Tree Protocol

IEEE 802.1Q VLAN

ITU-T G.8032 ERPS

IEEE 802.1X Port Authentication Network Control

IEEE 802.1ab LLDP

IEEE 802.3ad LACP

IEEE802.3af PoE

IEEE802.3at PoE+

IEEE 802.3bt PoE++

Fiber Option

SFP Plugable Module(LC)

SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~100Km

MM: 1310nm, 2Km; 850nm, 500-meter

Switching Capacity: 128Gbps

Throughput: 190.4Mpps

Packet Buffer: 12M

MAC Address: 16K

VLAN: 4K

Jumbo Frame: 10K bytes

Transfer Mode: Store and forward, forwarding delay<5us

MDX/MIDX: Support

Watchdog: Support

Network Topology

Star topology

Bus topology

Tree Topology

MTBF: 200,000 hours

PoE Protocol: IEEE802.3af(15.4W), IEEE802.3at(30W), IEEE802.3bt(90W)

PoE Wiring: 1/2(+), 3/6(-)

PoE Budget: 370W

Power Voltage

Input Voltage: DC 44-57V(PoE af), DC 52-57V(PoE at/bt)

Redundant power input

Removable 2*2-pin terminal block

Input current: 9A DC input Max

Total power consumption: Full loading without PoE ≤36W

Reverse polarity protection: Support

Reverse polarity protection: Support

Over-voltage protection: Support

Industry Standard

EMI: FCC Part 15B Class A

Surge protection of power: IEC 61000-4-5 6KV/4KV(8/20us)

Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us)

RS: IEC 61000-4-3 80 MHz-1 GHz: 10 V/m

EFT: IEC 61000-4-4 power interface: 4K；Ethernet ports: 2K

CS: IEC 61000-4-6 10V

ESD: IEC 61000-4-2 Level 4(8K/15K)

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Protection Level: IP40

Installation Method: Din Mounted

Security Certificate: CE/FCC/RoHS

Working Temperature: -40℃~75℃

Storage Temperature: -40℃~85℃

Relative Humidity: 5%~95%, non-condensing

LED Indicators

PWR(Power indicator), Green Color

On: power status is normal

Off: power off or power connection failure

S(System indicator), Red Color

On: Normal operation

Off: Connection failure

Blinking: Device initialization

USB(USB status indicator), Green Color

On: USB flash drive is detected by device

Blinking: the device is reading and writing the data from USB flash drive

Off: USB flash drive is not inserted or not detected by device

ALM(Fault status indicator), Red Color

On: Fault alarm

Off: Device on normal working state

Ethernet Port

1. Green Indicator

On: port link up

Off: port link down

Blinking: data is in normal transmission

2. Yellow Indicator

PoE ports

On: PoE working

Off: PoE not working

Fiber port, Green Color

On: port link up

Off: port link down

Blinking: data is in normal transmission

L3 Function

ARP: ARP table aging

DHCP server

IPv4/IPv6: Static routing

ECMP

Support ECMP (Equal-cost multi-path routing)

Support the configuration of ECMP Max next-hop

Support capacity balanced configuration

Route policy: IPv4 prefix-list

VRRP: Virtual Router Redundancy Protocol

Routing Protocol Specification

RIP: RIPv1/v2

OSPFv2: OSPFv2

BGP4

BGP4

BGP Support Routing Recursive ECMP

Support to view the number of neighbors and up/down state

IS-IS: IS-ISv4

Routing entry: 13K

L2 Function

Port aggregation

Support GE port aggregation

Support 2.5GE aggregation

Support 10GE aggregation

Support static aggregation

Support LACP dynamic aggregation

Up to 64 aggregation groups and up to 8 ports per group

Port features

Support IEEE802.3x flow control

Support interface counters

Support port isolationPort mirroring(One-to-One, Many-to-One)

Support loop detection(Port-based; VLAN-based)

Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast)

Mac-address table management

Support static Mac-address management

Support dynamic Mac-address Management

Support filtering Mac-address

Support MAC limit based on port and VLAN

Support MAC flapping based on port and VLAN

VLAN

Support access mode

Support trunk mode

Support hybrid mode

VLAN classification

Mac Based VLAN

IP Based VLAN

Protocol Based VLAN

GVRP

Normal mode

Fixed mode

Forbidden mode

QinQ

Port-based QinQ

VLAN-based QinQ(VLAN-stacking; VLAN-mapping)

Flow-based QinQ

LLDP

LLDP(Link Layer Discovery Protocol)

Ring network protocol

Support IEEE802.1D-STP

Support IEEE802.1W-RSTP

Support IEEE802.1S-MSTP

Support G.8032 ERPS protocol, single ring, sub Ring and major ring

Recovery time ≤20ms

L2 Multicast

IGMP snooping: Support IGMP snooping

Group address: Support group address

Security Function

ACL

IP Standard ACL

MAC extend ACL

IP extend ACL

IPv6 ACL

QoS

Support QoS Class, remarking

Support SP, WRR queue scheduling

Ingress port-based rate-limit

Egress port-based rate-limit

Support policy-based QoS

802.1x

Port access control

lMac-address access control

RADIUS server

Port-security: Port-security

IP source guard: IP Port/MAC binding

ARP-check: Support ARP-check and ARP packet filtering for illegal users

Access control: Support Telnet/SSH/HTTP/HTTPS user access control

Management&Maintenance Function

User Management

Support password protection

Support user authorization management

SNMP: Supporting SNMP V1/V2C/V3 version

Web Management

Web Management

Support HTTP V1.1

Support HTTPS

CLI management: Console/Telnet command line management

RMON: Support RMON(Remote Monitoring) alarm

Firmware upgrade: Firmware upgrade

Fault Detection

Ping/Tracerout

Dying gasp

Support optical transceiver DDM function

Cable detection: Support copper port cable detection

PoE management

Support 802.3af/802.3at/802.3bt

Support PD watchdog

Support PoE priority management

Support Max PoE power configuration for each port

Support alarm waterline configuration

Support reserved power configuration

NTP: Network Time Protocol

Syslog/Debug

Syslog/Debug

Syslog send to two servers

Configuration import/export

Support FTP/TFTP remote import/export

Support USB import/export

Dual partition management: Support dual partition switching

Application Protocol Function

DHCP Snooping

DHCP snooping trust port

Support remote-id/circuit-id configuration

DHCP option-82

DHCP client: Support DHCP client

Telnet server: Support telnet server

Telnet client: Support telnet client

SSH server: Support SSH server

TACACS: Support TACACS(the terminal access controller accesses the control system)

SFlow: Support network traffic analysis

TFTP: Support TFTP Client

Mechanical Drawing

Packing List

1pc switch

1pc user manual

1pc console cable