Advantage of 10-12T/H dry mix mortar manufacturing plant
1. In contrast to job-site mortars ,dry mortar is also called pre-mixed mortar ,which is produced in the factory with dedicated facilities on batching and blending of ingredients in highly-controlled process .It can be used directly just by adding water in job site .
2. It has advantages of consistent quality ,controlled inventory ,saving time and labor cost .By adding different chemical additives ,it has fine properties of bond ,thermal and acoustic insulation,crack-resistance ,workability , Water-retention,wear-proof,anti-corrosion,etc.
3. Dry mortar can match different kinds of new construction materials by improving formulation.These good properties not only improve building's quality and life greatly,but also decrease the usage of mortar in a large degree.
4. The demand for dry mortar has increased rapidly due to its outstanding merit comparing with the mortar mad in job-site.
2. Usage of 10-12T/H dry mix mortar manufacturing plant
1,Masonry mortar
2,Thin and smooth wall mortar
3, Hand-plastering screeding mortar
4, Colored coating mortar
5, Water-proof mortar
6, Plaster powder
7, Wall plastering mortar
8, Ceramic tile adhesive mortar
9, Self-leveling mortar
10,Heat-preservation mortar.
Specifications:
| Model | Automatic Dry mortar Production line |
| Capacity | 12 t/h |
| Mixing system | 1.5m3 Double Shaft Paddle Mixer |
| Total power | 61.5kw |
| Working Area of Mixing System | 4x 4x 3 m |
| Raw material | Cement, fly ash, additives, sand, etc |
| After-sale service | Erection & commissioning, operator training |
| Warranty | 12 months after erection |
| Each System Part Technical Data | |
| Mortar Mixer Model & Quantity | 1.5m3 Double Shaft Paddle Mixer, 1 unit |
| Discharge capacity | 1.1t per batch |
| Feeding capacity | 1.3t per batch |
| Mixing cycle time | 150S |
| Motor power | 11kw |
| Total weight | 1350kg |
| Overall dimension L*W*H | 1950×2050×1180mm |
| Mixing System Pre-mixing hopper Model & Quantity | 2.25m3 Pre-mixing hopper, 1 unit |
| Volume | 2.25 m3 |
| Mixing System End Product Hopper Model & Quantity | 2.25m3 End product hopper, 1 unit |
| Volume | 2.25m3 |
| Motor Power | 7.5kw |
| Overall dimension L*W*H | 2.4 * 1.3 *1.55 m |
| Batching & Weighting System Model & Quantity | Batching Weighing Hopper, 1 unit |
| Volume | 2.25m3 |
| Motor power | 3.0kw |
| Screw conveyor | LSY163*2800mm |
| Overall dimension L*W*H | 3.0* 1.16 *1.55m |
| Conveying System Type & Quantity | LSY219 Screw Conveyor, 1 set |
| Spiral Diameter | 219mm |
| Carrying Capacity | 25-30t/h |
| Conveying Length | 8m |
| Working Angle | 0-60degree |
| Motor Power | 11kw |
| Conveying System Type & Quantity | TDTG40/18 Bucket Elevator, 1 unit |
| Conveying Capacity | 20-25 t/h |
| Lifting Speed | 1.8 m/s |
| Motor power | 15kw |
| Packing System Type & Quantity | Automatic valve port packer, 2 units |
| Weighing scope | 5~50kg ( it can be adjusted) |
| Capacity | 8-10t/h per unit |
| Pulse De-dust Filter type & Quantity | DMC-48 Pulse De-dust Filter, 1 unit |
| Qty. of filter bags | 12 pics |
| Air consumption(m3/min) | 0.064 |
| Motor Power | 3kw |
| Total Weight | 400kg |
| Control system Type & Quantity | Auto PLC Control System, 1 unit |
| English Control panel board | Buttons, lights, meters, etc |
| High-pressure air system Quantity | 1 set |
| Air compressor with Air tank | Volume=0.6 m3 |
| Other Necessary Equipment & Documents | |
| Pneumatic Butterfly Valve | 4 sets |
| Documentation | 1 set |
| Spare Parts | 1 set |
| Concrete Foundation Projects / Design | 1 unit |
| Operation Guide | 1 unit |
| Maintenance Guide | 1 unit |
| Electrical Diagram | 1 unit |
