.BR-150W Laser Power Suppliesfor CO2 tube

Feature:

1. The power supply box for 185cm tube adopts ordinary H/L/P/G/IN/5V to receive laser control signal. And it uses black steel case

2. The laser power control is simple, the power supply for 185cm tube can use 0-5V signal to control the laser power. Also this analog signal power supply box uses the PWM (pulse width modulation) signal for laser power control too.

3. This analog signal power supply box has easy and simple control method which uses high and low level for laser power control. The use of TTL-level control can realize start and stop. At the same time the 150w power supply box has a protection switch, testing is made by external water and ventilation.

4. This 150w power supply box have stable working performance: Each power supply box for 185cm tube has been much more testing procedures and under full load high temperature (52~55 degrees celsius) 24 hours of aging, which ensure the stability of each analog signal power supply box.

5.The 150w power supply box has built-in network port and it can be connected with LCD display module by cable, The LCD module can show 1analog signal power supply box's output current,working status and fault code. Also the output current can be adjusted by potentiometer.

6. The 150w power supply box has good protection function: The analog signal power supply box have open circuit protection to make this 150W power supply work for a short time in the open state, so as to make it avoid the laser tube damage.

7. The analog signal power supply box has good compatibility : The power supply box for 185cm tube can match with most brand 1850mm or 20000mm 150W or 180W glass laser tube,besides this feature, the analog signal power supply box also has strong adaptability and fast response, engraving or cutting benefits good effect.

Specification

Input	Input voltage			AC220V±10% (AC110V specified while order)
	AC frequency			47~440HZ
	Maximum input power			1000W
	Maximum input current			4.5A
Output	Maximum output voltage			40KV
	Maximum output current			40mA (depending on the laser tubes of different manufacturers)
Efficiency				More than 90% (Full load)
Response speed				Not more than 1ms
Control lnterace				TTL multilevel switching control,effective level can be high and low selection (see control wining diagram)
Insulation		lnput-output		AC 1500V 1 minutes not more than 10mA
		lnput-shell		AC 1500V 1 minutes not more than10mA
		Output-shell		Connection
Open Circuit Protection				Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc)
Environmental Requested			Working temperature	-10 ℃~50 ℃
			Storage of temperature	-20 ℃~75 ℃
			Relative Humidity	Maximum 85%RH (non-condensing)
			Altitude Previous : Laser Cold Welding Machine Next : ZRsuns 220/110V Gray Color120W CO2 Laser Power Supply High Voltage CO2 Laser Power Supply You May Also Like DH-I-150 Toilet Paper Production Line High Speed Log Saw Cutter Automatic Grinding Yosoon 1500w 1000w 2000w Hand Held Fiber Laser Welding Machine Laser Melting Machine Laser Welding Machine_LWI V Ultra FLEXX TOPTEK Fiber Laser Welder Portable Laser Welding Machine Raycus Dual Chiller Laser Welding Machine AV220V Fiber Swing Joint Metal Container Factory Direct Supply 1000w 2000w Handheld Fiber Laser Welder for Stainless Steel Metal Laser Welder 3 in 1 Laser Welding Machine Philip Laser 949839602300 AX301 Laser SEND INQUIRY× To: 150w Hv CO2 Laser Psu 150w CO2 Laser Power Supply for 185/200cm CO2 Laser Tube Name: Email Address: Address: Phone Number: Message: Send Inquiry Now About Terms and Conditions Privacy policy Cookie Settings Services Login register contact us globalbiz8 Categories Suppliers Copyright 2023-2024 - www.globalbiz8.com All Rights Reserved