1. Use the automatic recording function

Start the car engine, the recorder will start and start therecording function automatically, turn off the car engine, therecorder will automatically save the recording content and shutdown.Therecorded images are saved in sections on the TF card. When the TFcard is full of storage, the recorder will cover the earlierrecorded images.Therecorded time period can be set in the menu, and the range is 1minute /3 minutes /5 minutes/three files.

[note] when selecting any of the three files of "1/3/5" minutes,the recorder will cover the earlier recorded images when the TFcard is full;

The forward normal folder is "front_norm" and the back normalfolder is "back_norm"

"Front_emr", "back_emr", "back_emr", "front_emr", "back_emr","back_emr", "back_emr", "back_emr"

The forward photo folder is "back_photo" and the backward photofolder is "front_photo"

2. Use the manual recording function

Press the "power button" of the recorder. After the recorder isstarted, press the "confirm" button to startrecording.Ifit is necessary to shut down, press [power button] for 2 seconds,the recorder can automatically save records and shut down.

3. Collision sensing function

The device is equipped with a g-sensor. In case of a seriousvehicle collision, the recorder will lock the broken videorecording of the accident and save it as a special image. At thesame time, the lock icon is displayed in the upper left corner ofthe display screen.Lockedimages are not cyclically overwritten.

"Tip"

B. The g-sensor supports sensitivity adjustment. You can changethe Settings according to the actual needs in the Settingsmenu.

4. Date and time setting

In the recording or standby state, the 1./3 part in the middle ofthe screen slides into the setting interface or clicks thesetting button to select the date setting.Slideup and down to adjust the date and time.

[note] in order to effectively record the date and time ofobtaining evidence of driving safety accidents, please set thecorrect time before using the machine.

5. One-click mute function

In the working state, click the recording button on the screen,and the microphone on the screen turns into the disable icon,indicating that the recording function has been turned off. Atthis time, the recorder only records images but notsounds.Whenthe recording key is clicked again, the microphone on the screenturns into the recording icon, indicating that the recordingfunction is resumed.

[prompt] the Settings will be automatically saved, and there isno need to set the mute function after starting up again.

6. Shoot files for playback

Video recording and photo taking interface: slide the screen fromleft to right to enter the playback interface.

7. Reverse visual

First, you must connect the car charger to the recorder, and thered line on the cable camera to theheadlights.Thecar charging machine will automatically start the recordingstate, and the reverse image will be displayed if there is areverse in any state.Themachine will automatically return to video mode after the end ofreverse viewing.

8. Parking monitoring

When the parking monitoring function is turned on, if the car hasa slight vibration (trigger sensitivity can be set as needed inthe menu), the recorder will automatically start recording for 20seconds and then shut down.

9. The USB model

In the recording or standby state, part 1./3 in the middle of thescreen slides down to enter the setting interface or click thesetting button to connect the USB cable, select USB in thesetting and pop up window: USB storage, USB camera and USBrecording.

Mirror mirror

In the recording or standby state, the middle 1/3 part of thescreen slides down to enter the setting interface or click thesetting button, select rear mirror, and then pull left and rightmirror after opening.Butplayback doesn't change.

11. Streaming media

In the recording or standby state, part 1. 3 in the middle of thescreen slides down to enter the setting interface or click thesetting button, and select "on" and "off" of the streaming mediafunction.Whenstreaming media is "on", full-screen rear circuit is the defaultwhen starting; when streaming media is "off", full-screen frontcircuit is the default when starting.

12. Time-lapse monitoring

In the recording or standby state, part 1. 3 in the middle of thescreen slides into the setting interface or clicks the settingbutton to select the time-lapse monitoringfunction.Theoptions are: "off", "1S", "2S", "3S".Whenselecting "off", when equipped with voltage drop line: disconnectACC line and the machine will automatically shutdown.Poweroff when car charger is supplied.select"1S", "2S" and "3S" with voltage drop line: when the ACC machineis disconnected and the screen is off, it automatically entersinto the time-shrinking recording state, recording at "1S oneframe", "2S one frame" and "3S one frame"respectively.ACCon the power, machine on screen back out of shrink, start normalrecording.Whenthe car is charged, the machine shuts downautomatically.