Camera System For DataVideo MCU And DataVideo Intercom System ITC-100 with ODC connector
Datavideo MUC ITC to Fiber with ODC connecter includes a Camera Optic Adaptor and a Optic Base Station. The system transports 1ch 3G/HD-SDI signal from the camera to the Base Station, 1ch reverse 3G/HD-SDI(optional), Genlock or BB/TC, Remote control for Datavideo (compatible with Datavideo MULTI-CAMERA CONTROL UNIT MCU-100), Datavideo intercom (Camera end be connected Datavideo HP1 Single-Ear Headset or professional 4-pin / 5-pin XLR headset, OB end be connected Datavideo ITC-100 Talkback System), tally(2 colors, Camera end be connected Datavideo ext tally lamp TD3, OB end be connected Datavideo ITC-100 Talkback System), Remote camera power supply (optional ,14.6V DC up to 100 Watts). The system puts all of the signals needed for multi-camera 3G/HD-SDI production on a fiber cable, insuring robust, trouble-free connectivity on any studio or remote production.
Features
1. 1 ch forward and 1 ch reverse SDI(optional)
2. Handle all Pathological patterns
3. Automatic cable equalization to ensure signal integrity
4. 3G/HD/SD-SDI input auto recognition, support 270Mbit/s - 2.97Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE 259M
5. Mic inputs with mute and pre-amps
6. Headphone with volume up or down
7. Remote control (Sony/ Panasonic/JVC/Ikegami/ Datavideo optional)
8. Tally LED+/- wet output or dry Contact Closure optional
9. V-mount or A-mount (Anton/Bauer)battery plate optional
10. Genlock or TC/BB is available
11. Reverse PGM / IFB audio is optional
12. 10/100M Ethernet is optional
13. Remote camera power supply (optional ,14.6V DC up to 100 Watts), with insertion detection protection, Lemo SMPTE 304 or Neutrik OpticalCON DUO connector
14. ODC connecter
Specifications:
General index
Work Temp | -25°C to 55°C |
Storage Temp | -40°C to 85°C |
humidity | 0 ~ 95% (non-condensing) |
Camera Optic Adaptor | |
Input power | DC 11~19V |
Power consumption | <12W |
Net weight | 1kg |
Appearance size | 188mm*116mm*45mm (without V-mount / A-mount) |
Optic Base Station | |
Input power | AC90~240V |
Power consumption | <12W |
Net weight | 3kg |
Appearance size | 19” 1U standard rack mount |
Optical:
Wavelength | 1310nm / 1550nm / CWDM |
Output Power | -6~-1dBm |
Rx sensitivity | <-18dBm |
Transmission Distance | SM fiber 10+km , MM fiber 300m |
Optical connector | ODC/Dual LC /FC/ST / Lemo / Neutrik (optional) |
SDI input/output:
Signal format | SMPTE 424M, SMPTE 292M, SMPTE 259M |
Data rate | 270Mbit/s - 1.48Gbit/s - 3Gbit/s |
Cable Equalization | Automatic cable EQ (Belden 1694A cable) 250m 270Mbit/s, 140m 1.5Gbit/s, 80m 3Gbit/s |
SDI interface | BNC 75 Ohm |
Genlock / TC / BB
Number of Channels | 1 |
Input/output impedance | BNC 75Ω (unbalance) |
Input/output voltage | 1.0Vp-p |
Differential Gain | < ±1.5% |
Differential Phase | < ±1% |
SNR | >60dB |
Intercom:
Camera Optic Adaptor | |
Interface | 4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
Microphone | Mic inputs with mute and pre-amps |
Headphone | with volume up or down |
Optic Base Station | |
Interface | 5pin XLR Male, be connected Datavideo Talkback System |
Tally:
Camera Optic Adaptor | |
Interface | 3.5mm jack, be connected Datavideo ext tally lamp |
Output | Green/Red 2 colors |
On: LED on Off: LED off | |
Optic Base Station | |
Interface | 5pin XLR Male |
Input | be connected Datavideo Talkback System |
Remote:
Camera Optic Adaptor | |
Interface | RJ45 Datavideo remote interface Compatible with Sony’s and Panasonic’s cameras |
Data | RS422 /RS232/RS485 |
Optic Base Station | |
Interface | RJ45 Datavideo remote interface |
Data | RS422 /RS232/RS485 |
PGM:
Camera Optic Adaptor | |
Interface | 4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
Headphone | with volume up or down |
Optic Base Station | |
Interface | 3pin XLR Female: Line level balanced audio input |
Ethernet:
Work mode | Full duplex/half duplex |
Data Rate | 10/100Mbps(AUTO) |
connection terminal | RJ45 |
Can be customized.