By combining RS485 communication and main battery charger, the 48VDC inverter charger is able to satisfy various requirement of monitoring and interactive control. With function botton on inverter to get into “engineering mode”. Inverter parameters can be customized freely for specific application.
48 volt charger inverter
This kind of split phase inverter charger is equipped with RS485 communication modules
Heavy duty design for motor loads
Ultra-low idle consumption could effectively save the energy
TECHNICAL SPECIFICATIONS OF 48VDC 120V/240VAC 6000W SPLIT PHASE INVERTER CHARGER
|
Models |
DPT6000 |
|
Rated Power(-10-50℃) |
6000W |
|
DC Input |
|
|
Rated Voltage |
24VDC (20.0~32.0VDC)x2 for 48VDC |
|
Max. Charge Current |
75A-house battery |
|
Battery Type |
AGM/Gel/Flooded/Lithium |
|
AC Input |
|
|
Output Voltage |
170-275VAC |
|
Input Frequency |
45~65Hz |
|
AC Output |
|
|
Output Voltage |
120/240VAC±5% |
|
Oput Frequency |
50/60Hz±0.3 |
|
Wave Form |
Pure Sine Wave |
|
Transfer Time |
≤8ms |
|
Efficiency |
>88% |
|
Overload |
105-120% 10s/ >120% 3s/ >150% 1s |
|
Max. Bypass |
7200W |
|
Protection |
DC over/low volt, AC input low/low volt, AC short circuit, over temp, overload |
|
Self-consumption |
50.0W |
|
Idle-consumption |
23.5W |
|
Protection |
|
|
DC Low-volt Alarm/Shutdown |
21.0V (Customizable at Engineering mode); x2 for 48VDC |
|
AC Low-volt Switch To DC |
187.0V (Customizable at Engineering mode) |
|
Bypass To Invertering |
198.0V (Customizable at Engineering mode) |
|
Battery Over-charge Shutdown |
31.4V |
|
General |
|
|
Working Temperature |
-10~45℃ |
|
Storage Temperature |
-20~55℃ |
|
Work/ Storage Humidity |
0-90% No condensation |
|
Dimension (W*D*H) |
607*308*198mm |
lithium iron phosphate battery suppliers
