7 Inch 1024x600 Tft Display With Lvds Interface 40 Pins 280 Nits Brightness
General Description:
This 7 inch tft lcd display of WY700TN40-24 has a display resolution of 1024 (RGB) x 600 (WVGA), an aspect ratio of 16:9 (W:H), and a vertical RGB bar arrangement of pixels. Its viewing size is 153.61×90(W×H) mm, appearance size is 164×103(W×H)×3.5(thick) mm.
Specifications:
Item | Contents | Unit |
| LCD | ||
| LCD Type | TFT / Transmissive / Normally Black | -- |
| Viewing direction | 6 O'clock | -- |
| Backlight | White LED x 24 | -- |
| Interface | LVDS interface | -- |
| Outline Dimension (lcm) | 164.0W) ×103.0(H) × 3.5 (T) | mm |
| Glass area (W×H×T) | 161.4 × 99.6 × 1.0 | mm |
| Active area (W×H) | 153.61 ×90.0 | mm |
| Number of Dots | 1024(RGB) ×600 | -- |
| Dot pitch (W×H) | 0.05 × 0.15 | mm |
| Pixel pitch (W×H) | 0.15 × 0.15 | mm |
| Operating Temperature | -10 ~ +50 | ℃ |
| Storage temperature | -20 ~ +60 | ℃ |
Polarizer | Top: 45度film | -- |
| Bottom: 45度film |
Absolute Maximum Ratings:
| Item | Symbol | Rating | Unit |
| Digital Supply Voltage | VDD | -0.3 to +3.96 | V |
| Operating Temperature range | TOP | -10 to +50 | ℃ |
| Storage Temperature range | TST | -20 to +60 | ℃ |
Electrical Specifications:
| Item | Symbol | Min. | Type. | Max. | Unit |
| Digital Power Supply Voltage | VDD | 3.0 | 3.3 | 3.6 | V |
| Analog Supply Voltage | AVDD | 8.4 | 9.6 | 10.0 | V |
| Gate On Voltage | VGH | 17 | 18 | 19 | V |
| Gate Off Voltage | VGL | -9 | -8 | -7 | V |
| Common Voltage | VCOM | 2.4 | 3.0 | 3.6 | V |
Backlight Electrical Specifications:
| Item | Symbol | Condition | Min | Typ | Max | Unit |
| Forward Voltage | VF | IF=160mA | - | 9.6 | - | V |
| Uniformity | △Bp | - | 80 | - | - | % |
| LCM Luminance | Lv | IF=16mA | 280 | - | cd/m2 |
Interface Connection:
PIN No. | SYMBOL | Function |
| 1 | VCOM | Common voltage |
| 2-3 | VDD | Digital power |
| 3 | VDD | Digital power |
5 | RESET | Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability.Normally pull high. (R=10KΩ, C=0.1μF) |
6 | STBYB | Standby mode, normally pull high STBYB=”1”, normal operation STBYB=”0”,timing control, source driver will turn off, all output are high-Z |
| 7 | GND | Ground |
| 8 | RXIN0- | Negative LVDS differential data inputs |
| 9 | RXIN0+ | Positive LVDS differential data inputs |
| 10 | GND | Ground |
| 11 | RXIN1- | Negative LVDS differential data inputs |
| 12 | RXIN1+ | Positive LVDS differential data inputs |
| 13 | GND | Ground |
| 14 | RXIN2- | Negative LVDS differential data inputs |
| 15 | RXIN2+ | Positive LVDS differential data inputs |
| 16 | GND | Ground |
| 17 | RXCLKIN- | Negative LVDS differential clock inputs |
| 18 | RXCLKIN+ | Positive LVDS differential clock inputs |
| 19 | GND | Ground |
| 20 | RXIN3- | Negative LVDS differential data inputs |
| 21 | RXIN3+ | Positive LVDS differential data inputs |
| 22 | GND | Ground |
| 23-24 | NC | NC |
| 25 | GND | Ground |
| 26 | NC | NC |
| 27 | DIMO | Backlight CABC controller signal output |
| 28 | SELB | 6bit/8bit mode select H : 6bit / L : 8bit |
| 29 | AVDD | Power for Analog Circuit |
| 30 | GND | Ground |
| 31-32 | LED K | LED Cathode |
| 33 | L/R | Horizontal inversion |
| 34 | U/D | Vertical inversion |
| 35 | VGL | Negative power for TFT |
| 36-37 | GND | Ground |
| 38 | VGH | Positive power for TFT |
| 39-40 | LED A | LED Anode |
Handling Precautions:
1.Do not leave the module operation or storage in Strong light . Strong light exposure causes degradation of polarizer and color filter.
2.The polarizer surface should not come in contact with any other object. It is recommended that they be stored in the container in which they were shipped.
