1、 Main Performance Index:
a) Working frequency: 8~12GHz;
b) Amplifier gain: 50dB;
c) Output power( Psat): ≥50dBm; CW
d) Gain flatness: ≤±1.2dB;
e) In-band emission: ≤-60dBc;
f) Harmonic suppression: ≤-15dBc;
g) Max. input power: +10dBm;
h) Noise figure: ≤10dB;
i) Phase noise:≤10dB weaker;
j) Input SWR: ≤1.5: 1;
k) Output SWR: ≤2.0: 1;
l) Input/output impedance: 50Ω。
2、 Power supply and efficiency
a) Working voltage (VCC): DC 28V ;
b) Efficiency: ≥26%( 100W output power test);
c) Power supply and control interface model: J30J-3ZJ;
d) Interface definition: Details in table 1。
Table 1 Definition for power supply and control interface
No. |
Marking |
Definition |
Remarks |
1 |
VCC |
DC +28V IN |
|
2 |
VSS |
DC +28V GND |
|
3 |
EN |
EN |
TTL electrical level * Status “ 1” - enable amplifier function, and“ TX” status indicator light on; * Status “ 0” - disable amplifier function,“ TX” status indicator light off。 |
3、 Physical characteristic index
a) Outline dimension: 330mm×180mm ×46mm,detail in figure 1 ;
b) Module weight: ≤5.0kg;
c) RF input/output connector: waveguide BJ100 ;
d) Surface finish: spray painted with black。
4、 Markings
a) Module name identification:“ X Band 100W Power Amplifier Module”;
b) Serial number:“ SN:XXXX-XX-XXX” E.g.:“ SN:2019-01-001”;
c) RF input/output markings:“ RF IN ”和“ RF OUT ”;
d) Power indicator light:“ POWER”;
e) Emission status indicator light:“ TX”
5. Environmental Adaptability( Design Assurance)
a) Working temperature: -20