Find a huge selection of Anti Acid Anti Alkali HDPE PP UPE Plastic Plain Bearings from China at Top Bearings.
HDPE,PP,UPE(UHMWPE) are approved can be used in faintish acid and alkali environment (30% CuCl2 solution and 30% NAOH solution is tested ok). Such bearings can be operated in liquid and contamination sensitive environments as acid/alkali/salt/solvent/oil/gas/seawater, and have general performance of lubrication and maintenance free, none magnetism, anti-rust and eroded of plastic bearings. But these bearings have not strong mechanical strength, and easy to be out of shape, so couldn't be used in heavy load and high-speed application. Among these 3 material, UPE have more excellent strength and low friction and could be used to lower temperature (lowest to -150℃). Generally the rings and cage were made with HDP PP or UPE, balls were made with glass stainless or ceramic.
The material of rings and cage: HDP, PP, UPE material.
The material of Balls: Glass Stainless, Ceramic material.
Material: | HDPE / PP / UPE Plastic Material | Basic Properties: | Anti-Acid And Anti-Alkali |
Faintish Acid & Alkali Environment: | 30% CuCl2 Solution And 30% NAOH Solution | Lower Temperature: | UPE Could Be Used To Lower Temperature (lowest To -150℃) |
The Material Of The Rings & Cage: | HDP PP Or UPE | The Material Of Balls: | Glass Stainless Or Ceramic |
High Light: | peek ball bearings, pillow block bearings |
Material | HDPE | PP | POM | PA66 | PVDF | PPS | PTFE | PEEK |
Long-time working temp. | 90 | 100 | 110 | 100 | 150 | 230 | 260 | 280 |
Density | g/cm3 | 0.91 | 1.42 | 1.14 | 1.77 | 1.35 | 2.18 | 1.32 |
Ball indentation hardness | 50 | 80 | 170 | 170 | 80 | 190 | 30 | |
Tensile stress | 25 | 30 | 70 | 80 | 50 | 75 | 25 | 95 |
Sliding friction coefficient | 0.29 | 0.3 | 0.34 | 0.35-0.42 | 0.3 | 0.08-0.1 | 0.3-0.38 | |
Melted temperature | 130 | 165 | 175 | 260 | 172 | 280 | 327 | 343 |
Short-time highest application temperature | 90 | 140 | 150 | 170 | 150 | 260 | 260 | 300 |
Coet of Inear expansion (10^-5/K) | 13-15 | 17 | 10 | 8 | 13 | 5 | 12 | 5 |
Dielectric constant at 1 Mhz(10^6HZ) | 2.4 | 2.25 | 3.7 | 3.6-5 | 8 | 2.1 | 3.2-3.3 | |
Volume resisrivity (Ω·cm) | >10^15 | >10^24 | >10^14 | 10^13 | 10^12 | >10^13 | 10^14 | 10^13 |
flammability UL94 | + | + | - | (+) | (+) | - | + | + |
Anti-weathering | - | - | - | - | - | - | + | - |
Note: + =resistant; (+) =partly resistant; - =non-resistant |
Chemical Composition | Material | ||||||||
PI | PEEK | PTFE | PVDF | PA66 | POM | PP | HDPE | ABS | |
Acrtate | + | + | + | (+) | (+) | + | + | (+) | + |
Formic acid (10% water) | + | + | + | + | - | - | + | + | + |
Ammonia (10% water) | - | + | + | + | + | (+) | + | + | + |
Aether | + | + | + | + | + | + | + | ||
Petrol | + | + | + | + | + | + | (+) | (+) | (+) |
Bori acid (10% water) | + | + | (+) | + | + | + | + | + | |
Aminoform | + | + | + | - | - | (+) | - | - | |
Aeti aid 100% | (+) | - | + | - | - | + | + | - | |
Aceti aid (10% water) | + | + | + | - | (+) | + | + | + | |
HF | + | - | - | + | + | (+) | |||
Formaldehyde aqu (30% water) | + | + | + | + | - | + | + | + | |
Glycerin | + | + | + | + | + | + | + | ||
Iodine, Glycol | + | + | (+) | - | (+) | + | + | (+) | |
K2Cr2O7 (10% water) | + | + | + | - | + | + | + | ||
KMnO4 (1% water) | + | + | + | + | - | (+) | + | + | (+) |
2-Hydronyprpionic 10% | + | + | + | - | - | + | + | - | |
2-Hydronyprpionic 90% | + | + | + | + | + | (+) | + | + | + |
Nad (10% water) | + | + | + | + | + | + | + | + | + |
NaNO3 (10% water) | + | + | + | + | + | + | + | + | |
NaOH (50% water) | + | + | + | + | - | + | + | + | |
NaOH (5% water) | + | + | + | - | + | + | |||
Oxalic (10% water) | + | + | + | + | (+) | (+) | + | + | + |
Tetracarp | + | + | + | (+) | + | - | - | (+) | |
H3PO3 100% | + | + | - | + | + | ||||
H3PO4 (10% water) | + | + | + | - | - | + | + | ||
NHO3 (2% water) | + | + | + | + | - | - | + | + | + |
HCL (2% water) | + | + | + | (+) | - | - | + | + | + |
H2SO4 98% | - | + | - | - | + | (+) | - | ||
Soap liquid | + | + | + | + | + | + | |||
Alkaliliquid (10% water) | + | + | + | + | + | + | + | ||
Toluene | + | + | + | + | + | + | + | (+) | - |
Water, cold | + | + | + | + | + | + | + | + | + |
Water, hot | + | + | + | (+) | - | + | + | + | |
H2O2 (30% water) | (+) | + | + | - | - | + | + | + | |
H2O2 (0.5% water) | + | + | + | - | (+) | + | + | + | |
Asphalt | + | + | (+) | + | (+) | (+) | |||
Note: + =resistant; (+) =partly resistant; - =non-resistant |