Apply to enveloping plates for motorcycle batteries, Such as 12V4.5Ah, 6.5Ah, 7Ah etc…
PLC control system, touchable the man-machine interface.
Single feeding rack, feeding motor worked automatically according to the detection of photoelectric signal,
automatic feeding.
Set the length of PE follow plat’s size, the machine Auto measuring PE’s length and automatic cutting.
The cutting position can be adjusted up & down, change mould for center line of PE Separator
According to the size of the plate, the width of the horizontal transfer track can be adjusted; According to
the width of the PE, the width of the PE transfer track can be adjusted; Model change can be completed
within 15 minutes, especially suitable for multi-specification battery enveloping plate in one machine.
The machine is equipped with two sets suction plate system, 2 set Positive conveyor adopts parallel
feeding, feeding balance, stability, neat, lack of plate alarm.
Set the number of positive plates and negative plates freely, Such as 2+/2- ,3+/3-.......8+/8- etc…; The
plate group conveying adopts the non-slip chain transmission with fill group alarm on the conveyor.
Fully closed design, exhaust system in the lower part of the machine, Can better to collecting lead dust
and effective protection electronic components.
The machine is equipped with automatic alarm security system, and meet safety gate was opened, the
machine automatic stop.
The equipment is equipped with centrifugal pump suction plate system with dust filter, It can be removed
and cleaned; The machine has suction plate detection function.
The machine is equipped with automatic alarm security system, and meet the alarm, will automatically
alert, and automatic stop immediately and display the alarm information on the man-machine interface;
The machine is equipped with functional button switches such as start, stop and reset etc….
The machine is equipped with automatic mode and Manual mode etc…
The machine can automatically record the effective working time, failure time, failure times and qty.
Users can choose left - out models or right - out models according to the production line.
