Babbitt alloys remain consistent from edge-to-edge and end-to-end through thousands of pounds of ingots and bars, and through thousands of miles of spray wire.
Babbitt formulations meet or exceed their engineering standards. With higher productivity, less rework, less cleanup. Fewer defects and higher quality finished products.The coatings are ductile, low in oxides and exhibit a bright,metallic appearance.
Equivalent to: Tafa04T, Metco Sprababbitt , PMET542
|
Type |
Chemical composition |
|||
|---|---|---|---|---|
|
Sn |
Sb |
Cu |
other |
|
|
Babbitt wire |
90 |
7~8 |
3~4 |
0.25 |
|
Typical |
Bond Strength |
Deposit Rate | Deposit Efficiency | Machine Ability |
|---|---|---|---|---|
|
Nil |
3000 psi |
48 lbs/hr/100A | 70% | Good |
|
Grade |
Density |
Melting point |
|---|---|---|
|
Babbit wire |
6.67g/cm3 |
354°C |
1.6mm , 2.0mm , 2.3mm , 3.0mm , 3.17mm
1. Reasonable price, regular sizes stock, short delivery time;
2. International production technology, quality guaranteed;
3. 100% replacement / Refund for problematic items;
Arc spraying is the use of electric arc burning in two consecutive fed between the wires to melt the metal, with a high velocity gas stream molten metal atomization, and the atomization of the sprayed metal particles so that they accelerate the work to form a coating technology .
The use of a flame as the heat source, the metal and non-heated to a molten state, forming a mist flow in the state of high-speed air jet to the substrate, the injection of the molten minute particles impact upon the substrate above, plastic deformation, into a sheet shape superimposed sedimentary layers.
Suitable for electric arc spraying of babbitt lead based bearing alloy.
Babbitt and other alloy products has high performance, high wear resistance, corrosion resistance, seismic, pressure, and other prominent environmental advantages and technological advantages.
Mainly used in cement machinery, steel, machinery, petroleum machinery, chemical machinery, turbine machinery, power generation machinery, mining machinery, metallurgical machinery, compression pad machinery, shipbuilding, machinery and so on large-scale equipment, bearings, bushings, bushings.
|
Diameter |
Dimension Tolerance |
Packing |
Wire Weight |
|---|---|---|---|
|
1/16"(1.6mm) |
+0/-0.05 |
D 300 Spool |
15kgs(33 lbs)/spool |
|
2.0mm |
+0/-0.05 |
D 300 Spool |
15kgs(33 lbs)/spool |
|
1/8"（3.17mm） |
+0/-0.05 |
Coil Form |
20-400kgs/coil |
Other sizes can be produced based on customers’ requirement.
Brand, Neutral or Customized
Courier/Air/Sea
Normally we keep stock of 1.6mm and we can delivery in 1-3 days.
For mass order, delivery time depends on the quantity.
