PORFLUX IPORFLUX IIPORFLUX IIIPORFLUX ⅣPORFLUX Ⅴ
(Ø152)
PORFLUX III pleated filter cartridge filters are designed for application where high flow rate and precise particles removal rating is required. This filters which is designed with 152mm out diameter have ten times more filtration area comparison with normal filters. Highly recommended for not only generation from 10 to 11 of PDP, LCD, AM-OLED(Active Matrix Organic LightEmitting Diode) but also sea water desalination, pre-filtration of RO system and power generation, etc.
BIG CAPACITY
Suitable for 10~11 generation LCDUltra capacityVery long service timeFewer change-outSuitable for high pressure application
Electronic Industry LCD, PDP, AM-OLED, photo-resist, etchant, developer, stripper Film & Fiber Industry Monomer, slurry additive, floppy disc coating, computer tape coating, audio and videotape General Process Industry Adhesive, automotive paint, Ink and dye, acid, base, and oxidant Chemical & Petrochemical Industry Monomer, polymer, glycol, mono-ethanol- amine and di-ehtanol-amine for gas scrubbing, acid, base and product polishing, rinse and solvent Pharmaceutical & Biological industry Ointment, pure water for dialysis, diagnostic, LVPs, SVPs, tissue culture media, extraction chemicals, re-crystallization chemical, serum Food & Beverage Industry Corn syrup, edible oil, bottle water, beer, soft drink and distilled spirits, wine, fruit Juice General Water Process DI water , process water
| Dimension & Structure | Length | 20”, 40”, 60” inch / 508, 1,016, 1,524 mm |
|---|---|---|
| ID | 75 mm | |
| OD | Cap : 160 mm, Body : 152 mm | |
| Effective filtration area | PP : 2.5 ~ 4.2㎡, PES : 4.2 ~ 4.6㎡, PTFE : 4.8 ~ 5.2㎡ | |
| Materials of Construction | Filtration media | Polypropylene, PES, PTFE, PP membrane, Fiber glass |
| Support layers | Polypropylene | |
| Core & case | Polypropylene | |
| O-rings & gaskets | Silicone, EPDM, Viton, TEV | |
| Operating Conditions | Maximum differential pressure | 30 psid / 2.1 bar at 60℃ 60 psid / 4.2 bar at 30℃ |
| Maximum operating temperature | 194℉ / 90℃ |
VS. WATER FLOW
RATE
REMOVAL RATINGS
| Polypropylene micro fiber | Absolute : 0.6, 0.8, 1, 5, 10, 20 Nominal : 0.2, 0.45, 1, 3, 5, 10, 30 | PTFE Membrane | 0.05, 0.1, 0.2, 0.45, 0.7,1, 3, 5, 10 |
|---|---|---|---|
| PP Membrane | 0.1, 0.2 | ||
| PES Membrane | 0.04, 0.1, 0.2, 0.45, 0.6, 0.8, 1.2 | Fiber glass | 0.45, 1, 5, 10 |
