Car Engine push start stopbutton system with remote start function for car alarm
Buying Guides
1.This product hasanti-theft function but without remote control. Usethe remote control of the original car or a remote controlinstalled later to remotely start the preheating andcooling
2.When you buy this product,please find a professional master to install it, otherwiseit will cause a short circuit and burn the host, and itwill not be returned and repaired.
3.As long as the car has thefunction of remotely opening and closing the door, that is,as long as the car has a remote control, the remote controlcan remotely open or close the door to achieve the remotestart of the car.
4.When installing, firstconnect the plug to the corresponding wire, and then plugin the host. Please contact customer service if you needspecial wires for special cars
Product Description
More discount of product andfreight cost, please contact us
| Quiescent current | 25mA | Working Voltage | DC 10~16V |
This is a simple and easyuse Car Alarm with Finger Engine Start Push Button Startand Stop. Car Engine Push Starter is easy to install anduse, can start or stop your car much easier and keep yourcar safe at the same time. This item is only work withDC12V cars at the moment.
Note: There is not a remotecontroller, you can use your own remote controller orbuy a remote controller for the remote start function(itmeans that there must be a remote function for your caralready). Please find a professional person to installit.
You can find some otherproduct with different functions here or chat with us aboutthat if you want some more features.
Feature:
1.Push button enginestart/shut down.
2.Telecontrol startingfunction.
3. Open acoustics anddashboard function.
4.Telecontrol starting safehandbrake detection function.
5.Push button engineactivates the foot brake detectionfunction.
6.10 minutes timing flameoutfunction after telecontrol starting.
7.Automatic locking the doorfunction after telecontrol starting.
8.Can be matched your caralarm system or keyless entry system.
9.Can be used in all kind of12V cars.
10. Easy to install and todetach.
FAQ
1.How to release thedirection lock?
To install a one-buttonstart, you must break the car key in the key slot to unlockthe direction lock,Or Remove the lock directly
Of course, you can alsobring the key with you, and you can insert the key everytime you unlock the car.
2.Can a car with ananti-theft chip be installed?
If some models are equippedwith engine chip anti-theft, the chip on the original carkey handle must be removed to stick to the ignition switchto maintain mutual induction with the engine.
Or remove the induction coilat the lock, and then tie the chip and the induction coiltogether, and then install it inside the instrument panel,hidden and beautiful.
More question, pleasecontact us
