Cast basalt is a mineral material produced by melting natural basalt at a temperature of approximately 1300°C, followed by casting into moulds. This contributes to its superb physical and chemical properties.
We offer cast basalt tiles for coal bunkers and chutes. These cast basalt tiles are bedded as well as jointed in cement/special bonding agents like resins depending upon application. These tiles mostly find application in automotive industry and are designed to provide long-lasting lining and enhancement to involved operational life cycle for both plant as well as equipment.
SiO2 | Al2O3 | Fe2O3 | TiO2 | CaO | MgO | K2O | Na2O | FeO | P2O5 | MnO |
---|---|---|---|---|---|---|---|---|---|---|
42-45% | 13-16% | 13-14% | 0.022 | 10-12% | 10-11% | 0.045 | 0.045 | 13-14% | <1% | <1% |
NO. | ITEM | PERFORMANCE VALVE |
---|---|---|
1 | Specific gravity | 2.9-3.05gm/cc |
2 | Compressive strength | 3000-4500kg per sq cm(min) |
3 | Bending strength | 300kg per sq cm(min) |
4 | Water Absorption | 0 |
5 | Solubility in Acids | 0.006 |
6 | Hardness | 8(MIN.)Moh Scale |
7 | Modules of elasticity | 11.1×104N/mm2 |
8 | Expansion coefficient (room temperature to 60°C) | 0.75×10-5/K |
9 | Thermal Conductivity | 1.15W/mk |
10 | Special Heat Capacity | 0.8kj/Kg.K |
11 | Highest Temperature For application | 350°C |
Advantages:
* Utilizing Cast Basalt enhances and improves operational life of plants.
* These are best suited for jobs where extensive cutting is needed.
* We can also deliver pre-cut tailored tiles based on the considerations of vibration, impact and other factors at client’s end.