Class 1 Division 1 80W LED Explosion Proof Lights

Series Name: Leopard Series.

Why we use " Leopard ", the animal name to name our lighting agile hunter, body supple, flexible movement, running fast.

Model No.: EX-BLP

Ex Mark: II 2 G Ex d IIC T4 Gb

II 2 D Ex tb IIIC T96ºC Db IP66

Clase I División 1&2 Grupos A B C D

Clase II División 1&2 Grupos E F G; Clase III

Power Range: 30W 45W 60W 80W

Emergency LED Explosion proof platform lights are available.

30~80w, flood light, platform light , spot lighting ,emergency light if ( adding battery ) , portable emergency light ( if adding battery and handle structure )

LED Explosion proof plarform light applications

It can use in Zone 1, Zone 2, Zone 21, Zone 22

It can be applied to gas and dust environments which requirement is very high, such as hydrogen, acetylene.

1. Operation place:Suitable for 2 to 8 meters high lighting. the light Angle can be flexibly adjusted

2.Suitable for platform device of oil refining,chemical warehouse and other flammable and explosive places.

3.Suitable for drilling rigs and well repair shelf lighting (surface ceiling installation with chain protection)

4. Suitable for different flood light,low ceiling and transmit lighting area .Can replace traditional metal halide lamp,high-pressure sodium lamp of 150W ,100W,70W,etc.(usually use half wattage to replace the traditional light ,eg:100W LED to replace 200 W traditional light because LED light with verity of beam angle. )

5.Emergency light: adding battery inside ,

Emergency portable light: adding battery inside , and handle structure ,2 hours emergency working time.

LED explosion proof light detailed description

1. Aluminum plate: Excellent thermal conductivity properties

Efficient heat dissipation base metal clad copper and aluminum substrates.

Excellent thermal conductivity properties, lower module operating temperature, long life, increase power density and reliability. At the same time, aluminum plate directly attached to the shell outside, evenly distributed in the periphery, outside the circle, the heat path is shorter, higher thermal performance.

Reflow solder paste technology for lamp beads [bi:dz], more effective safeguard and good reliability of the light source.

2.LED source : OSRAM LED chip ,High lumens , 140LM/W, lifespan is more than 50,000hrs .

3.Transparency:High anti-impack:4 joule without any protection for glasses; light transmittance >90%.

Tempered glass ,most is direct light, in strict accordance with the explosion-proof electrical products of transparent glass impact resistance test, surface cover glass thickness is 8 mm, resistance to impact in the absence of any protection is 4 joule.

Transparent high-performance materials, improve the light output efficiency effectively, light transmittance more than 90%.

4. Reflector: High light source,energy efficiency light source;Anti-glare; High heat dissipation.

use of light reflection, refraction principles designed to ensure astigmatism be reused, will maximize energy efficiency light source lamp beads distributed in the periphery.

looking straight the light, cannot see the light chip directly, so anti- glare , can protect your eyes.

Led chip annular design ,close to the aluminum housing, good heat dissipation.

5. LED driver : Anti lightning strike>6 kv, THD≤10% (actuallly can do less than 7%)

Using self-designed led driver /power supply. Ensure specialized from every details.

Why?

Because , the led driver / power supply in market with general design, usually for commercial lamps or simple industrial lighting use. Can not guarantee their safety and reliability for harsh or hazardous environment.

Our own design driver ,with full consideration to the hazardous area of the working environment,

selection criteria and higher than ordinary commercial lighting driver / power supply standards, such as capacitance choosing : ruby, very high quality, imported brand.

6kv Anti lightning strike,

during the rainy season or working at offshore platforms, if thunderstorm electric shocks and other extreme weather appear. At this time, usually cause electrical equipment trip, (problem cause ), seriously affect the normal work efficiency, in order to increase the resistance to lightning weather, our products are all increased the function of anti lightning 6 kv.)

THD≤10%, actual less than 7%

THD total harmonic distortion is less than or equal to 10%, actual less than 7%, and not cause interference and pollution to all kinds of sophisticated equipment and instruments, as well as the grid.

6. Lamp Housing Material :extruded aluminum,High heat dissipation , copper-free aluminum, Hard anodized, Anti-impack IK10 for housing extruded aluminum: High heat dissipation , copper-free aluminum.

Currently, the main common lamps use die casting aluminum(ADC12)

Our products are made of extruded aluminum(6063-T5 by hardering).

The thermal conductivity of aluminum extrusion is more than 2 times aluminum die-casting .The thermal conductivity of ADC12 is 96.2(W/m.K) ,extruded aluminum (6063)is 209(W/ m.K).

copper content of Die-cast aluminum ADC12 is (1.5 to 3.5)%, copper content of extruded aluminum is 0.1%. therefore named copper-free aluminum,its corrosion resistance is stronger.

It can be used in humid marine environment And corrosive atmospheres.

Hard anodized: Not easy to scratches the lamp housing

With hard anodized, compared to ordinary like spraying, stronger adhesion, effectively improve the product corrosion resistance, abrasion resistance, weatherability. maintain our product color fullness in harsh environments, Not easy to scratches, paint chips and so on.

Anti-impack IK10 for housing , It can withstand 20 joules impact.

7. Accessory : stainless steel material for screw nut, multi-core cable

stainless steel material for screw nut:

screw nut outside the light housing, choosing SUS304 stainless steel , imported from Japan.

If need to satisfy the requirement of special corrosion sites, can change to SUS316 (higher corrosion resistance, the price is slightly higher, adding Mo on the basis of SUS304. In accordance with the ASTM standard to produce stainless steel, with good corrosion resistance, heat resistance, low temperature strength and mechanical properties, stamping, bending and other thermal processing, and no heat treatment hardening, non-magnetic)

Multi-core cable:

Lamps multi-core cable with a large diameter cables to protect the safety and reliability, and design considerations for cable entry, the upper and lower metal seal, to ensure safe use of the product.

Overall impression and How to make to make it explosion proof

1. gold cylindrical specialization

The overall impression of the housing: Shape: design is based on the investigation of customer needs, independent research and development, while gold cylindrical specialization reflects the beauty upscale atmosphere.

2. A variety of installation

A variety of installation design for a variety of installation environment, installation more convenient.

Eg. Ceiling/wall/seat/pole mounting and so on.

3.Derating design,

Derating design, considering the product can used for extreme temperature environment of temperature - 45 ~ + 60 ºC normally, on the selection and design of product components are settled aside enough margin, to guarantee the reliability of the products using and longevity.

Why is Ex mark : EXd II C T4 Gb

d:meaning "Flameproof" , can prevent arcing, sparks and heat to ignite outside and flameproof enclosure shall withstand internal explosion pressure without damage

T4 is 135ºC,and T5 is 100ºC,and our lighting test is 101ºC,though T4 ,but near T5.

(within 7.5m ,is Zone 1 , -50%~60% market , our leopard is for that , outside 7.5m,is for Zone2, 30% market , our Jaguar series for that ,and for zone0 is 10%market )

Under the flammable gas or dust dangerous environment, can prevent arcing, sparks and heat generated inside the lamp to ignite combustible gas and dust in surrounding environment, so as to achieve the purpose of proof.

On the other hand, the flameproof enclosure shall withstand internal explosion pressure without damage;

Thread design, set screws, which can limit the flammable sources, such as air and concentration

Thread using debit 5 to 8, and in strict accordance with the precision thread standard ISO 6g6H, have long thread length.

Cover glass using glue sealing,Thickness with 10mm..Inside length> 13mm (more than actual requirements, requirements is 12.5mm), With <0.15mm, limit explosion sources straight mouth joints.

Cable entry device, metal sealing up and down, ensure the safety of the product use.

Can increase the emergency light function according to the customer demand,(only power less than 80W)the power of emergency lights,is 18w turn to 30w. e.g. emergency light time is 2 hours When the scene suddenly power failure, for emergency evacuation.