Optimal Saw Parameter Page1/3
|
Model |
SY-6 |
Machining Length |
4000mm |
|
|
Machining width |
|
Servo motors for pushing material |
750W（Tuke) |
|
|
Machining thick |
10-80MM |
Servo motors for sawing |
1.3KW |
|
|
Machining Cross section area
|
250*30MM |
Sawblade Motor |
10HP |
|
|
Scan Speed |
80m/min |
Sawblade Dia |
H450*D30 |
|
|
Length Scan |
Infrared light sensor（SICK） |
Suctionlet Dia |
100mm*1 |
|
|
Defect Scan |
Fluorescent sensor（SICK） |
Installed ttl Power |
11HP |
|
|
Guide Rails |
Roust |
System |
Windows 7 |
|
|
Worktop height |
900MM |
Scribe Space |
adjustable |
|
|
N.W： |
about1230KG |
Machine size（mm）： |
6700*1300*1600 |
1、Working method: When the pusher is backed up, the drawing line on the surface of the sheet is
scanned and the length of the sheet is sent to the control computer for optimisation
2、Working method: When the pusher is backed up, the drawing line on the surface of the sheet
is scanned, and the length of the sheet is fed into the control computer for optimization
3、Specified specification priority (priority sawing of workpiece lengths specified in the bill of
materials, priority access to materials in short supply on the production line)
4、Fixed cutting (sawing in order of material list, this mode can be used for material without defects)
5、Value first (prices can be set for different parts in the cut list and the preference is optimised
at the time according to the maximum value obtained) Page2/3
6、Defective sawing (only sawing according to the position of the drawn line, no optimization)
7、Support Excel table to import bill of material, branch form format customization
8、Cut list can add barcode, print barcode, two-dimensional code freely set
