Customized Wooden Acoustic Movable Partitions Wall For Artgallery And Office
Specifications
| Technical Parameter for Partition Panel | Panel Width | 23 - 48 inch |
| Panel height | 78 - 156mm | |
| Sound proof | 32 - 38 dB | |
| Operation | Manual | |
| Frame | Aluminium | |
| Vertical profile | Anodised aluminium profiles with integrated magnetic strip and sealing edges on the inside | |
| Finish options | Fabric, veneer, HPL melamine, vinyl, carpet, customers own material, Bare finish | |
| Base options | Plywood, Gypsum, steel, MDF | |
| Max width | Unlimited | |
| Panel weight | 25 - 40 kg / sq | |
| Pass door selection | door | Single dor or double door |
| Seals | Top | Manual |
| bottom | Manual |
Track:
The tracks are made from extruded 6063 – T6 anodized aluminum. The track housing shall utilize grooves and interlocking steel pins for positive alignment of adjacent track sections, and shall be reinforced overhead by drop rod brackets. Aluminum track housing shall include an integral nut slot to accept a hardened square nut for attaching each drop rod bracket to the top of the track.
Trolley:
BUNGE Centre/ Side /Remote stacking system with a Two wheeled nylon trolley made with the base Material of POM 45 tempered steel shall be used as per approved stacking method.
Aluminum trim: The panel trims will be standard series with exposed Aluminum trims of 15mm thickness finished in 6063 – T6 Anodized Aluminum shall be used.
Seals:
Vinyl seal of butane rubber will be used as top and bottom and as well as closure seals for the operable wall system. Retractable seal drop will be 23mm.
Acoustic insulation Material: Rockwool sound absorption glass fiber shall be used.
Magnetic Strip: Ferrite plastic magnetic material will be used in between aluminum profiles to enhance acoustic performance of the wall.
Successful Case of Customized Wooden Acoustic Movable Partitions Wall
