DC Solar Swimming Pool Pump
SSP series Solar Swimming Pool Pump
Permanent magnet brushless DC Solar water Pump
DC24V,DC72V,DC96V Solar pumping system
Power range:200 - 1200w
Head range:9 - 19m
Flow range:6 - 31 m3/h
Pump Inlet/Outlet:1.25"×1.25",2"×2",3"×3"
Requiring the quantity of solar panel from 2 - 6 pieces
Poly / Mono 250/300 watt solar panel
DC Solar surface pumps are fitted with a permanent magnet,brushless motor,
Which enables the efficient use of energy from a wide range of supply options.
The pump system offers the perfect water supply solution.
This project products are mainly used in dry irrigation of agriculture.
It can be used for drinking water and living water.
The living condition could be much improved.
1. Permanent magnet,brushless motor,saving energy and offering maximum efficiency.
2. NSK bearing with alloy mechanical seal,offering the longer working life.
3. MPPT function offers higher utilization rate of solar energy.
4. Water proof and leak proof based on double water seal.
5. Controller maximum's operating temperature:60℃
6. Featured function:MPPT function,Soft start function,Dry running protection,Adjustable speed function,
Error wiring protection,Over/under-voltage protection,Overload protection,Over-current protection,
phase-loss protection,High working temperature protection
1.Power Supply:1.Solar panel | 2.Storage batteries.
DC24 Solar pumps:21-50V (VMP)
DC72 Solar pumps:63-150V (VMP)
DC96 Solar pumps:84-200V (VMP)
2.Water temperature:≤35℃
3.PH value 6.5 ~ 8.0
Model | Volatge (V) | Power (W) | Vmp (V) | Max.Flow (m3/h) | Max.Head (m) | Outlet (Inch) |
---|---|---|---|---|---|---|
SSP200A | DC24 | 200 | 21-50 | 6 | 9 | 1.25"×1.25" |
SSP500C | DC72 | 550 | 63-150 | 17 | 15 | 2"×2" |
SSP900C | DC72 | 900 | 63-150 | 21 | 19 | 2"×2" |
SSP1200D | DC96 | 1200 | 84-200 | 31 | 19 | 3"×3" |
HYBSUN solar SSP series solar swimming pool pump which get the power from the sun, you will never have an electric bill.SSP Solar swimming pool pump can not only be used for pool water filtration, but for fountains, water features, pond aeration, circulating water for aqua culture or to irrigate small farms.Which is a mechanical device designed to move a fluid by means of the transfer of rotational energy from impeller.?Fluid enters the rapidly rotating impeller along its axis and is cast out by centrifugal force along its circumference through the impeller’s vane tips.? The action of the impeller increases the fluid’s velocity and pressure and also directs it towards the pump outlet.? The pump casing is specially designed to constrict the fluid from the pump inlet, direct it into the impeller and then slow and control the fluid before discharge.
HYBSUN solar SSP series swimming pool pump consists of PPO impeller,plastic pump head,plastic filter.Aluminum motor casing,Brushless DC motor(BLDC motor),3 meters,3 cores,1.5mm2 cable and controller with installation tools.As accessories which include float switch,non-return valve,shrinkable tubes,adhesive tape,operation manual.
HYBSUN BLDC motor which mainly consists of stator and rotor.For the stator which consists of silicon steel sheet & high temperature copper wire.Whose the max temperature is 180 degrees. All winding automatically by machine,which can produce about 2000 pieces per day.For the rotor which includes NSK bearing,SS 304 shaft and 40SH magnet.Whose the max temperature is 150 degrees.
MPPT function
Maximum Power Point Tracking is electronic tracking - usually digital.The charge controller looks at the output of the panels and compares it to the battery voltage.It then figures out what is the best power that the panel can put out to charge the battery.It takes this and converts it to best voltage to get maximum AMPS into the battery. (Remember, it is Amps into the battery that counts). Most modern MPPT's are around 93-97% efficient in the conversion.You typically get a 20 to 45% power gain in winter and 10-15% in summer.Actual gain can vary widely depending weather, temperature,battery state of charge,and other factors.
Soft start function
HYBSUN controller control the the motor operation continues,operating power is gradually increased until motor reaches it;s maximum speed.As a result,service lifetime of both the motor and controller and protection switch gear and prolonged.
Dry running protection
HYBSUN solar surface pump’s controller that offers intelligent detection function.Pump will be automatically power off once running without water for 30s.
Adjustable speed
HYBSUN solar controller with adjustable speed function.User could set different working speed to adjust water capacity and head according actual water demand to avoid water waste. Meanwhile,which also reduces the mechanical wear of the motor as well as the start up loads on the PV array
Self-protecting functions
Error wiring protection
Over/under-voltage protection
Overload protection
phase-loss protection
High working temperature protection
HYBSUN use PPO impeller which is one of the most important engineering plastics due to its high strength, high heat distortion temperature, and high chemical resistance,Because of its unique combination of high mechanical property, low moisture absorption, excellent electrical insulation property, excellent dimension stability, and inherent flame resistance.
Hereby guarantee that HYBSUN solar SSP solar swimming pool pump are guaranteed against defects in material and technology for 24 months beginning from the date of shipping the goods from factory.Within this period,adjustment,repair or replacement of parts or whole will be performed without charge except in the case of damage caused by accidents,misuse,tampering or lack of care.
Not under warranty
1)Defects caused by the owner's neglect of instructions in the manual before operation or misuse of the pump.
2).Operation on higher/lower voltage than specified,tampering with electrical system,voltage surges as a result of lightening or faulty electrical supply.
3).Any damage caused by natural disasters,such as fire,flood or earthquake.
4).The pump tampered with or damaged by any non-authorized technician.
5).Maximum fluid temperature exceed 35℃.
6).Maximum sand content exceed 0.25%.
7).Putting water inside the controller by user.
HYBSUN always insists to provide best service,the delivery time is about 2 weeks.
HYBSUN could according your demand to select the loading port,Normally we choose Ningbo port.