Key Features

8*10/100/1000Base-T RJ45 PoE, 4*1G/2.5G Base-X SFP+ slots

Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection

Comply with IEEE802.3af PoE and IEEE802.3at PoE+ standard

Support one digital output for relay alarm(terminal block Pin 5/6)

Layer 3 features: Support IPv4/IPv6 static routing, DHCP server

Layer 2 features: VLAN/VLAN Classification/QinQ/STP, RSTP, MSTP

Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP DDM

IPV6 management/Web/PoE management/SNMP/Telnet/TFTP/Web upgrading

Support G.8032 ERPS protocol, recovery time ≤20ms

Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection

IP40 fan-less and Din-rail design

Operation temperature: -40℃ ~+75℃

With above features, it is an ideal solution for IP Surveillance, wind, electricity, assembly automation, subway PIS, power SCADA, sewage treatment, metallurgy, intelligent transportation, rail transportation, military and other industries.

Specification

Product Name: 16 port Hybrid Rate Layer 2+ Managed Industrial Ethernet PoE Switch

Port

8*10/100/1000Base-T RJ45 PoE

4*1G/2.5GBase-X SFP (9-12 ports)

4*100/1000Base-X SFP(13- 16 ports)

1*RJ45 Console port (115200,8,N,1)

Alarm port

One digital output for relay alarm

Alarm relay current carry ability: 1A@24VDC

Network Medium

10BASE-T: Cat 3, 4, 5 or above UTP(≤100 meter)

100BASE-TX: Cat 5 or above UTP (≤100 meter)

1000BASE-TX: Cat5 or above UTP (≤100 meter)

Network Protocol

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Ethernet

IEEE 802.3ab 1000Base-T Ethernet

IEEE 802.3z 1000Base-X Ethernet

IEEE 802.3ae 10GBase-X Ethernet

IEEE802.3x Flow Control and Back Pressure

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1w Rapid Spanning Tree Protocol

IEEE 802.1Q VLAN

ITU-T G.8032 ERPS

IEEE 802.1X Port Authentication Network Control

IEEE 802.1ab LLDP

IEEE 802.3ad LACP

IEEE802.3af PoE

IEEE802.3at PoE+

Fiber Option

SFP Plugable Module(LC)

SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~100Km

MM: 1310nm, 2Km; 850nm, 500-meter

Switching Capacity: 44Gbps

Throughput: 65.4Mpps

Packet Buffer: 12M

MAC Address: 16K

VLAN: 4K

Jumbo Frame: 10K bytes

Transfer Mode: Store and forward, forwarding delay<5us

MDX/MIDX: Support

Watchdog: Support

Network Topology

Star topology

Bus topology

Tree Topology

MTBF: 200,000 hours

PoE Protocol: IEEE802.3af(15.4W), IEEE802.3at(30W)

PoE Wiring: 1/2(+), 3/6(-)

PoE Budget: 240W

Power Voltage

Input Voltage: DC 44-57V(PoE af), DC 52-57V(PoE at)

Redundant power input

Removable 4-pin terminal block

Input current: 5.8A Max

Total power consumption: Full loading without PoE ≤18W

Reverse polarity protection: Support

Over-current protection: Support

Over-voltage protection: Support

Industry Standard

EMI: FCC Part 15B Class A

Surge protection of power: IEC 61000-4-5 6KV/4KV(8/20us)

Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us)

RS: IEC 61000-4-3 80 MHz-1 GHz: 10 V/m

EFT: IEC 61000-4-4 power interface: 4K；Ethernet ports: 2K

CS: IEC 61000-4-6 10V

ESD: IEC 61000-4-2 Level 4(8K/15K)

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Protection Level: IP40

Installation Method: Din Mounted

Security Certificate: CE/FCC/RoHS

Working Temperature: -40℃~75℃

Storage Temperature: -40℃~85℃

Relative Humidity: 5%~95%, non-condensing

LED Indicators

PWR(Power indicator), Green Color

On: power status is normal

Off: power off or power connection failure

S(System indicator), Red Color

On: Normal operation

Off: Connection failure

Blinking: Device initialization

Ethernet Port

1. Green Indicator

On: port link up

Off: port link down

Blinking: data is in normal transmission

2. Yellow Indicator

PoE ports

On: PoE working

Off: PoE not working

Fiber port, Green Color

On: port link up

Off: port link down

Blinking: data is in normal transmission

L3 Function

ARP: ARP table aging

DHCP server

IPv4/IPv6: Static routing

L2 Function

Port aggregation

Support GE port aggregation

Support 2.5GE aggregation

Support static aggregation

Support LACP dynamic aggregation

Up to 64 aggregation groups and up to 8 ports per group

Port features

Support IEEE802.3x flow control

Support interface counters

Support port isolation

Port mirroring(One-to-One, Many-to-One)

Support loop detection(Port-based; VLAN-based)

Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast)

Mac-address table management

Support static Mac-address management

Support dynamic Mac-address Management

Support filtering Mac-address

Support MAC limit based on port and VLAN

Support MAC flapping based on port and VLAN

VLAN

Support access mode

Support trunk mode

Support hybrid mode

VLAN classification

Mac Based VLAN

IP Based VLAN

Protocol Based VLAN

GVRP

Normal mode

Fixed mode

Forbidden mode

QinQ

Port-based QinQ

VLAN-based QinQ(VLAN-stacking; VLAN-mapping)

Flow-based QinQ

LLDP

LLDP(Link Layer Discovery Protocol)

Ring network protocol

Support IEEE802.1D-STP

Support IEEE802.1W-RSTP

Support IEEE802.1S-MSTP

Support G.8032 ERPS protocol, single ring, sub Ring and major ring

Recovery time ≤20ms

L2 Multicast

IGMP snooping: Support IGMP snooping

Group address: Support group address

Security Function

ACL

IP Standard ACL

MAC extend ACL

IP extend ACL

IPv6 ACL

QoS

Support QoS Class, remarking

Support SP, WRR queue scheduling

Ingress port-based rate-limit

Egress port-based rate-limit

Support policy-based QoS

802.1x

Port access control

lMac-address access control

RADIUS server

Port-security: Port-security

IP source guard: IP Port/MAC binding

ARP-check: Support ARP-check and ARP packet filtering for illegal users

Access control: Support Telnet/SSH/HTTP/HTTPS user access control

Management&Maintenance Function

User Management

Support password protection

Support user authorization management

SNMP: Supporting SNMP V1/V2C/V3 version

Web Management

Web Management

Support HTTP V1.1

Support HTTPS

CLI management: Console/Telnet command line management

RMON: Support RMON(Remote Monitoring) alarm

Firmware upgrade: Firmware upgrade

Fault Detection

Ping/Tracerout

Dying gasp

Support optical transceiver DDM function

Cable detection: Support copper port cable detection

PoE management

Support 802.3af/802.3at

Support PD watchdog

Support PoE priority management

Support Max PoE power configuration for each port

Support alarm waterline configuration

Support reserved power configuration

NTP: Network Time Protocol

Syslog/Debug

Syslog/Debug

Syslog send to two servers

Configuration import/export: Support FTP/TFTP remote import/export

Dual partition management: Support dual partition switching

Application Protocol Function

DHCP Snooping

DHCP snooping trust port

Support remote-id/circuit-id configuration

DHCP option-82

DHCP client: Support DHCP client

Telnet server: Support telnet server

Telnet client: Support telnet client

SSH server: Support SSH server

TACACS: Support TACACS(the terminal access controller accesses the control system)

SFlow: Support network traffic analysis

TFTP: Support TFTP Client

Mechanical Drawing

Packing List

1pc switch

1pc user manual

1pc console cable