Dissolvable Frac Ball are inserted into wells to build up pressure in the ground.

This high pressure created causes the fracking of specific identified areas.The balls vary in size, subject to its application.

The frac balls should withstand high pressure and temperature in order to make a successful fracking process.

The development of the dissolvable fracking ball has boosted functionality, efficiency of the technology, and saved on time and cost of retrieving them.

Among the tools used in the fracturing process, frac balls are pumped into the well in order to activate various devices.

Specifically, the balls are designed to activate tools as well as to isolate portions of a well during multi-stage fracturing operations.

These two processes allow for the accumulation of pressure in a specific area, thereby enabling fracturing in a target section of the well.

Just as you would create custom designs for cost and time saving purposes, we also possess the ability to save you further time and expense by offering numerous post-extrusion magnesium product fabrication processes both in-house and through our partner.

Meifu Technology specializes in the following, but are not limited to, custom magnesium fabrication capabilities:

Grade	Mechanical Properties at Room Temperature						Dissolution Rate		Dissolvable Magnesium Alloy Type
	Min. Tensile Strength		Min. Yield Strength		Min. Elongation	Hardness
	MPa	Ksi	MPa	Ksi	%	HB	Test Conditions	mg/(cm2*h)
MF-96	380	55.2	300.0	43.5	5.0	96.0	93℃ 3%KCL	40-65	High temp./strength
MF-98	450	65.3	350.0	50.8	3.0	98.0	93℃ 3%KCL	30-60
MF-982	450	65.3	350.0	50.8	3.0	98.0	93℃ 3%KCL	15-23
MF-989	320	46.4	250.0	36.3	5.0	98.0	90℃ 3%KCL	100-120
MF-916	380	55.2	260.0	37.7	3.0	101.0	50℃ 0.84%KCL	20-35
	380	55.2	280.0	40.6	3.0	101.0	93℃ 3%KCL	90-130
MF-55	280	40.6	250.0	36.3	5.0	70.0	93℃ 3%KCL	90-110
MF-88	120	17.4	80.0	11.6	35.0	65.0	93℃ 3%KCL	200-400	Low temp./ultra-high ductility
MF-105	250	36.3	180.0	26.1	12.0	75.0	93℃ 3%KCL	30-55	High temp./ductility
MF-85	250	36.3	180.0	26.1	12.0	64.0	93℃ 3%KCL	40-70
MF-75	310	45.0	220.0	31.9	5.0	75.0	93℃ 3%KCL	55-80
							50℃ 0.84%KCL	15-25
MF-73	310	45.0	220.0	31.9	5.0	70.0	93℃ 3%KCL	40-70
MF-741	300	43.5	250.0	36.3	6.0	70.0	Previous : Hydraulic Breakers JSB SILENCE TYPE / S SERIES Next : Excavator Grapple Saw You May Also Like Hydraulic Hammer and Breaker High Quality Excavator Hydraulic Breaker for 1-100t Excavator Hydraulic Breaker - Top Type Hydraulic Breaker[Box Type] Chiseling Stone Tool Excavator Rock Breaker Spare Parts Chisel G-1 Breaker Mining Brazil Okada Hydraulic Breaker Chisel Tools Bits UB8,UB11,OUB305,OUB307,OKB316,TOP35,OUB302 Hydraulic Breaker Diaphram SB121 Factory Price Box Type Hydraulic Breaker Daemo Hydraulic Breakers SEND INQUIRY× To: Dissolvable Frac Balls for Down-hole Oil and Gas Fracking Name: Email Address: Address: Phone Number: Message: Send Inquiry Now About Terms and Conditions Privacy policy Cookie Settings Services Login register contact us globalbiz8 Categories Suppliers Copyright 2023-2024 - www.globalbiz8.com All Rights Reserved