GNS A99 LOW EXPANSION ADHESIVE FOAM
GNS A99 LOW EXPANSION ADHESIVE FOAM is a one component aerosol polyurethane adhesive foam curing swiftly with moisture. Providing very fast and powerful adhesion for various construction materials, especially highly recommended for heat insulation systems.
PRODUCT FEATURES
Powerful adhesion of polystyrene heat panels (XPS and EPS).
Instant adhesion and wall plugging within two hours.
More economical. Ready to use in aerosol can.
Minimum 14 m² heat insulation panel adhesion for each can.
Minimum expansion during drying period.
After dried, no further expansion and shrinkage.
A lighter material compared to plaster, alternative material, used in heat insulation systems.
No more extra burden or weight to building.
High yield up to 50 liters, depending on the humidity and temperature.
Usable at low temperature like 0 °C
APPLICATIONS AREAS
• Best for mounting heat insulation panels and filling voids during adhesive application.
• Advised for wooden type construction materials adhesion to concrete, metal etc.
• Applications needed minimum expansion.
• Mounting and isolation for frames of windows and doors.
APPLICATION INSTRUCTIONS
Shake the aerosol can for at least 40 seconds;
Clean and moisten surfaces with a water sprayer prior to application;
Fit the gun or plastic applicator on the adapter.
Firmly screw the can on the adapter and turn the flow adjustment screw; Fill the holes and cavities.
Bottom up during application; Foam will be tack-free in about 10 minutes; Excess can be trimmed in about one hour;
Fresh foam can be removed by using GNS Foam cleaner or acetone. Cured foam can only be removed mechanically.
STOREAGE AND SHELF LIFE
12 months in unopened packing store in temperature between +5℃ to +25℃, Keep in cool, shade and well ventilated area. Always keep the can with the valve pointed upwards.
PACKAGING
750ml/can, 500ml/can,12pcs/ctn for both Manual type and Gun type.
SAFETY RECOMMENDATION
Do not breathe spray/vapor; In case of eye contact, flush with water and get immediate medical attention;
Use in well-ventilated areas;
Wear suitable protective clothing, gloves and goggles;
Keep away from direct sunlight and do not expose temperatures over 50℃;
Do not burn or pierce even after use;
Keep away from heat, sparks, flames and static electricity; Turn off sources of ignition (pilot light etc.);
Keep out of the reach of children.
Gunuo (Tianjin) Industrial Co., Ltd. is a group of company in China which specializes in PU foam, silicone sealant, acrylic sealant, PU sealant, adhesive and so on. We have two manufacturing plants located in Tianjin and Foshan China. Our factory covers 200,000 square meters with 32 advanced full automatic PU foam production lines. We produced and sold out more than 160 million cans in 2018 with 55% market share. Our annual silicone sealants production capability is 20000 tons. Our products meet American Standard, European Standard, China Standard and some other International Standards.
