Pneumatic valves are valves driven by compressed air. When purchasing pneumatic valves, it is only necessary to specify the specifications, types, and working pressures to meet the purchasing requirements. flow.

sudanafluid pneumatic valve series: butterfly valve

The butterfly plate of the butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical passage of the butterfly valve body, the disc-shaped butterfly plate rotates around the axis, and the rotation angle is between 0° and 90°. When it rotates to 90°, the valve is fully open. The butterfly valve is simple in structure, small in size and light in weight, and only consists of a few parts. And it only needs to rotate 90° to open and close quickly, the operation is simple, and the valve has good fluid control characteristics. When the butterfly valve is in the fully open position, the thickness of the butterfly plate is the resistance when the medium flows through the valve body, so the pressure drop generated by the valve is very small, so it has better flow control characteristics. Butterfly valves have two types of seals: elastic seal and metal seal. Elastic sealing valve, the sealing ring can be inlaid on the valve body or attached to the periphery of the disc. Valves with metal seals generally have a longer life than those with elastic seals, but it is difficult to achieve complete sealing. Metal seals can adapt to higher operating temperatures, while elastomeric seals have the disadvantage of being limited by temperature. If the butterfly valve is required to be used as flow control, the main thing is to correctly select the size and type of the valve. The structure principle of the butterfly valve is especially suitable for making large-diameter valves. Butterfly valves are not only widely used in general industries such as petroleum, gas, chemical, and water treatment, but also in cooling water systems in thermal power plants. Commonly used butterfly valves are wafer type butterfly valve and flange type butterfly valve. The wafer type butterfly valve uses stud bolts to connect the valve between the two pipeline flanges. The flange type butterfly valve has a flange on the valve, and the flanges at both ends of the valve are connected to the pipeline flange with bolts.

sudanafluid pneumatic valve series: ball valve

The ball valve is evolved from the plug valve. It has the same lifting action of rotating 90 degrees, the difference is that the cock body is a sphere with a circular through hole or channel through its axis. The ratio of the spherical surface to the channel opening should be such that when the ball rotates 90 degrees, all spherical surfaces should appear at the inlet and outlet, thereby truncating the flow. The ball valve can be closed tightly with only a 90-degree rotation operation and a small torque. The completely equal body cavity of the valve body provides a low-resistance, straight-through flow path for the medium. It is generally believed that ball valves are most suitable for direct opening and closing, but recent developments have designed ball valves so that they can be used for throttling and flow control. The main feature of the ball valve is its compact structure, easy operation and maintenance, suitable for general working media such as water, solvent, acid and natural gas, and also suitable for media with harsh working conditions, such as oxygen, hydrogen peroxide, methane and ethylene. The ball valve body can be integral or combined.