Description
enviCloneDual Static and Cyclic (Dynamic) Mechanical Load Tester or Testing Machine is a specially designed for IEC61215 standard MQT16, MQT20 clauses and IEC 62782 to test impact resistance of photovoltaic modules solar panels. By arranging multiple cylinders on the surface of the component, the cylinders can expand and contract to exert tension and pressure on the surface of the component. During the test, the pressure, temperature, and internal conductivity of each cylinder can be monitored in real time.
Features
Load applcation method: the cylinder drives the suction cup to press and suck; Mechanical load material and structure: Made of aluminum alloy hot extruded profiles, movable aluminum alloy frame, each screw connection needs to have spring washers to prevent loosening; A new tracking base is added to the traditional base for the installation of the tracking bracket. The tracking base has a short span and multiple supports to ensure stability during the test process; The test platform is 800mm from the ground by default and can be adjusted to 760 or 780mm through the guide rail; Each suction cup structure includes a cylinder, suction cup, pull pressure gauge, etc., making control more convenient; The pressure of each cylinder can be controlled individually to achieve different load values in different areas of the component; Industrial computer control and recording, large data storage capacity; Pressure, tension, holding time, number of cycles, cycle frequency, and current size can be preset; Pressurization time can be set;
Brief Specification
| Model No.(enviClone) | EVCL-DML-2200, EVCL-DML-2600 |
| Max Dimensions of Tested PV Module Panel | 2200 mm x 1200 mm, 2600mm x 1300mm, etc. |
| (Dimensions can be customized) | |
| Quantity for each test | 1 Piece of PV Module |
| Pressure Method | Pneumatic Cylinders |
| Quantity of Pneumatic Cylinders | 50 pcs, 98pcs, etc (varies as per your Max dimensions of solar panel) |
| Quantity of Pressure Sensors | Each pcs for each pneumatic cylinder |
| The Max Pressure can be tested | 12,000 Pa |
| The Max Pulling Force can be tested | 7,500 Pa |
| Accuracy Deviation | ≤3% |
| Deformation Sensor | 1 (or customized as per requirement) |
| Controlling Method | Siemens PLC + HM1 |
| Drive Method | Air Compressed |
| Load Amplitude Test Range (Static) | Pressure: +500~12,000 Pa (Continuous, adjustable) |
| Suction: -500 ~ -7,200 Pa (Continuous, adjustable) Note: The test time and pressures can be adjusted during the test every time. | |
| Load Amplitude Test Range (Dynamic) | Pressure: -2,500 Pa ~ +2,500 Pa |
| Suction: -500 Pa ~ -7,200 Pa | |
| Frequency: 3~7 times / min | |
| Accuracy Deviation: ≤ ±50 Pa. |
Test Standards
IEC TS 62782 Photovoltaic (PV) modules – Cyclic (dynamic) mechanical load testing IEC 61215 Ed.3 Static: Forward Direction 2400 Pa·1 IEC 61730 MST 34 Equivalent: IEC TS 60904-12, IEC TS 61836, ISO/IEC 17025, etc.
Contact
Wuxi EnvicloneTest Equipment Co., Ltd specializes in environmental simulation and test chambers including temperature humidity chambers, ozone aging chambers, UV aging chambers, salt spray chambers, rain fall waterproof chambers, blowing dust sand proof test machines, dynamic mechanical load testing equipment, walk in climatic chambers, solar raddiation testing chambers, altitude test chambers, and so on for various industries such as automotives, photovoltaic (PV) modules, solar power panels, new energy batteries, rubber manufacturing, electronics, military, etc.
