Technical data

Material：Expanded PTFE

Temperature range：-240 ° C ~ 260 ° C

Pressure resistance：0-8 MPa, depending on the installation situation

Chemical Resistance：Chemical resistance to all media pH 0–14, except molten alkali metals and elemental fluorine

Physiologically inert：harmless in all recommended applications

Density （ASTM D792）：0.6g/cm3~0.9g/cm3

Tensile Strength （ASTM F152）：＞8MPa

Recovery （ASTM F38）：＜15%

“m”（ASTM F586）：2.5

“y”（ASTM F586）:20MPa

Aging resistance:Under the conditions that allow it to be applied, aging will not occurProperties

high mechanical properties

excellent chemical resistance

UV resistant; non-ageing

nontoxic ;ensure extremely

cleanliness

flanges

heat exchangers

gas lines and food production systems

ISO 9001:2015

Specifification selection and installation

The selection of the correct size of the sealing belt should take into account the following factors the composition and width of the sealing surface, the structure of bolts and flanges, and the specific working conditions.

Method

Clean and dry the seal face, choose a certain width of the bulk ptfe sealing tape, tear to protect paper, adhesive tape to seal the surface near the a bolt will be sealed with paste, exploring end in a near the bolt cross overlapping, intersection outside the more than 2 cm above (note: use on the plane of the flange, the two end must cross overlapping. When used on groove flanges, it can be overlapped in parallel with each other more than 2cm), close the corresponding sealing surface, tighten each bolt evenly, the cross part of the two ends will be pressed to the same thickness asv other parts, and the cross part will never leak.