Product Overview
G0310 Modbus to HART Gateway, designed by Microcyber Corporation is a gateway device for Modbus-RTU protocol and HART protocol. As Modbus master, G0310 Modbus to HART Gateway communicates with devices that have Modbus-RTU communication function via RS485 interface. It can convert device data to HART device variables output, and it also supports 4~20mAcurrent output.
Features
Be tallied with HART7.0HART slave and Modbus master mode4~20mA analog signal overlay HART digital signalSupport 1 Modbus slave deviceSupport 6 device variables and 4 dynamic variablesConfigure gateway by HART interfaceWrite protect user dataSupport high/low alarm currentRS485 Modbus interfaceLED power and communication indicatingStandard DIN rail installation
Details
Whole Structure of Gateway Device
Terminal Definition of G0310 Modbus to HART Gateway
G0310 Modbus to HART Gateway jumper
Specification
Parameters
Parameter | Value |
Working Temp. | -20 ... +70 °C |
Storage Temp. | -40 °C ... +85 °C |
Power Supply | 12 … 42 V |
Dimension (L x W x H) | 114.5 x 22.5 x 99 mm (without connector) |
Interface | RS485 |
Indicator Light | SYS, APL, L/A, Rx/Tx, bus-specific |
Weight | 150 g |
Protocol before conversion | Modbus |
Protocol after conversion | HART |
EMC | GB/T 18268.1 |
Noise Interference | GB 9254 |
Installation | DIN-Rail, EN-50022 35mm x 7,5mm |
Selection
GW-MODB-HART | G0310 Modebus to HART Gateway | |||||
|
| Code | Hardware Interface | |||
|
| R4 | RS485 | |||
|
|
|
| Code | Software Interface | |
|
|
|
| M | Modbus RTU | |
|
|
|
|
|
|
|
GW-MODE-HART R4 M ——Selection Example | ||||||
Size
