customer needs, choose different technology, with advanced technology research and development design team, focus on technology upgrading. And obtained The Chinese patent, in the leading position in the industry. Our production line adopts advanced disassembly type, most of them is assembled in our factory. Greatly shorten the installation time.
breaks the large-sized gypsum ore into small particles smaller than 25mm, which are stored and transported into the mill for grinding, and the raw gypsum powder that has been ground to the required fineness. Then the product is sent to the fluidized bed furnace through the powder classifier. Calcined, and the rest is returned to the mill for regrinding until qualified. Calcined qualified gypsum powder is sent to the clinker bin for storage or sent to the product workshop for use.
The main working principle of the fluidized furnace drying system: the main body of the fluidized furnace is mainly composed of dense hot air pipes, which pass through the high-temperature hot air pipes, exchange heat with materials, and release heat to Gypsum materials. A Roots fan is installed at the bottom of the fluidized furnace, and the cold air is blown into the furnace body through the air distribution plate, and the powder in the furnace body is blown to a boiling state. Flowing to the discharge port, the quality of the Gypsum powder produced in this way is stable, and the crystal water content and initial and final setting time are relatively easy to control.
