Hot Selling Aluminum Cladding Sheet & Coil | Buy Hot Selling Aluminum Cladding Sheet & Coil from Nanjing Metalli Industrial Co., Ltd, China

Hot Selling Aluminum Cladding Sheet & Coil Details

Brand Name

YB

Place of Origin

China

Temper

H14,O

Type

Coil or plate

Hot Selling Aluminum Cladding Sheet & Coil Introduce

1. Aluminum alloy number
No.	Layer		Alloy No.				Cladding ratio				Cladding Ratio tolerance
1.1	Layer 1		4004,4045,4104,4343,7072,etc.				4%-30% (single cladding)				±2%
1.2	Layer 2		4004,4045,4104,4343,7072,etc.				4%-15% (both sides cladding)				±2%
1.3	Core layer		AA3003 or custom				-				-
2. Product size and tolerance
No.	Specification				Size					Tolerance
2.1	Length (mm)				-					-
2.2	Width (mm)				12-1300					min ±0.02,max ±1
2.3	Thickness (mm)				0.05-0.8					min ±0.005,max ±0.04
3. Chemical composition for some typical alloys
No.	Internal Alloy Number	AA number	Chemical Composition (%)
			Si	Fe	Cu	Mn	Mg	Zn	Ti	Zr	Bi	Others		Al
												Each	Total
3.1	1060	1060	0.25	0.35	0.05	0.03	0.03	0.05	0.03			0.03		99.6
3.2	1070	1070	0.2	0.25	0.04	0.03	0.03	0.04	0.03			0.03		99.7
3.3	1100	1100	0.95		0.05-0.2	0.05			0.1			0.05	0.15	RE
3.4	3003	3003	0.6	0.7	0.05-0.2	1-1.5	0.05	0.1				0.05	0.15	RE
3.5	3005	3005	0.6	0.7	0.3	1.0-1.5	0.2-0.6	0.25		Cr 0.1		0.05	0.15	RE
3.6	4004	4004	9.0-10.5	0.8	0.25	0.1	1.0-2.0	0.2				0.05	0.15	RE
3.7	4045	4045	9.0-11.0	0.8	0.3	0.05	0.05	0.1				0.05	0.15	RE
3.8	4047	4047	11.0-13.0	0.8	0.3	0.15	0.05	0.2				0.05	0.15	RE
3.9	4104	4104	9.0-10.5	0.8	0.25	0.1	1.0-2.0	0.2			0.05-0.2	0.05	0.15	RE
3.10	4343	4343	6.8-8.2	0.8	0.25	0.1	0.05	0.2				0.05	0.15	RE
3.11	4343A	4343A	6.8-8.2	0.6	0.1	0.1	0.02	0.1				0.05	0.15	RE
3.12	6060	6060	0.3-0.6	0.1-0.3	0.1	0.1	0.35-0.6	0.15	0.1	Cr 0.05		0.05	0.15	RE
3.13	6061	6061	0.4-0.8	0.7	0.15-0.4	0.15	0.8-1.2	0.25	0.15	Cr 0.04-0.35		0.05	0.5	RE
3.14	6063	6063	0.2-0.6	0.35	0.1	0.1	0.45-0.9	0.1	0.1	Cr 0.1		0.05	0.15	RE
3.15	6A02	6A02	0.5-1.2	0.5	0.2-0.6	0.1-0.35	0.45-0.9	0.2	0.15			0.05	0.15	RE
3.16	7072	7072	0.7	0.1	0.1	0.1	0.1	0.8-1.3				0.05	0.15	RE
3.17	8011	8011	0.5-0.9	0.6-1.0	0.1	0.2	0.05	0.1	0.08	Cr 0.05		0.05	0.15	RE
3.18	4343+1%Zn	4343+1%Zn	9.0-11.0	0.8	0.25	0.1	0.05	0.7-1.3				0.05	0.15	RE
3.19	4045+1%Zn	4045+1%Zn	9.0-11.0	0.8	0.3	0.05	0.05	1.7-1.3				0.05	0.15	RE
3.20	4A13	4343Mod	8.9	0.6	0.2	0.1	0.08-0.2	0.2	0.15			0.05	0.15	RE
4. Mechanical properties for some typical alloys
No.	Alloy number	Thick. (mm)	Temper	Yield Strength Rp0.2(Mpa). Min		Tensile Strength Rm (Mpa)			Elongation (%) A50,Min		Homogenization treatment	Typical usage
4.1	3003	0.08-0.15	O	35		95-135			8		N	Fins
4.2	3003	0.16-0.35	O	35		95-135			10		N	Fins
4.3	3003	0.15-0.3	H12	90		120-175			0.5		N	Fins
4.4	3003	0.06-0.08	H14	125		145-185			0.5		N	Fins
4.5	3003	0.081-0.3	H14	125		145-200			0.5		N	Fins
4.6	3003	0.06-0.16	H16	160		165-205			0.5		N	Fins
4.7	3003	0.2-0.3	H24	125		145-205			6		N	Fins
4.8	3003-1	0.35-3.0	O	35		95-135			20		Y	Plate
4.9	3003-1	0.40-3.0	H14	125		145-185			3		Y	Plate
4.10	3003-1	1.0-3.0	H24	125		145-185			10		Y	Plate
4.11	6A02	0.8-4.5	O	≤85		≤150			20		Y	Vacuum plate
4.12	6060	0.8-4.5	O	≤85		≤150			20		Y	Vacuum plate
4.13	6063	0.8-4.5	O	≤85		≤150			20		Y	Vacuum plate
4.14	4343	0.07-3.0	O	35		95-150			8		N	Sheet for brazing
4.15	4343	0.07-3.0	H14	120		140-200			0.5		N	Sheet for brazing
4.16	4045	0.07-3.0	O	35		95-150			8		N	Sheet for brazing
4.17	4045	0.07-3.0	H14	120		140-200			0.5		N	Sheet for brazing
4.18	4104	0.07-3.0	O	35		95-150			8		N	Sheet for brazing
4.19	4104	0.07-3.0	H14	120		140-200			0.5		N	Sheet for brazing
4.20	4A13	0.07-3.0	O	35		95-150			8		N	Sheet for brazing
4.21	4A13	0.07-3.0	H14	120		140-200			0.5		N	Sheet for brazing
4.22	4047	0.07-3.0	O	35		95-150			8		N	Sheet for brazing
4.23	4047	0.07-3.0	H14	120		140-200			0.5		N	Sheet for brazing
4.24	3003	0.25-0.35	H24	130		155-205			6		N	Fins for air cooler
4.25	3003	0.1-0.2	H14	125		145-185			1		N	Fins
4.26	3003	0.1-0.3	O	35		95-135			10		N	Fins
4.27	3003	0.3-0.8	H14	125		145-185			2		Y	Plate
4.28	3003	0.8-2.5	H14	125		145-185			4		Y	Plate
4.29	3003	0.5-1.6	O	35		145-185			20		Y	Plate
4.30	3003-1	0.3-1.8	O	35		95-135			20		Y	Band
4.31	3003-1	0.5-4.0	O	35		95-135			25		Y	Plate
4.32	3005 Mod	0.25-0.6	H24	150		185-235			8		N	Long life tube
4.33	6060	0.8-4.5	O	≤85		≤150			20		Y	Vacuum plate
4.34	6063	0.8-4.5	O	≤85		≤150			20		Y	Vacuum plate
4.35	3005	0.8-4.5	O	40		80-120			20		Y	Vacuum plate
4.36	3005	0.6-4.5	H22	110		145-195			15		Y	Vacuum plate
4.37	1100	0.2-0.3	H24	90		115-155			3		N	Fins for air cooler
4.38	6A02	1.0-5.0	O	≤85		≤150			20		Y/N	Plate
5. Surface finish and other properties
No.	Item			Description
5.1	Surface finish			a. The material shall be free from pinholes and tearing; b.The material shall be free waves and buckles; c. The slit edges must be free from burrs and shall be straight and parallel.
5.2	Depth of Curvature			In any length or width of 1 meter of the material,the depth of arc shall not exceed 2 mm.
6. Packing,Shipping and others
No.	Item			Description
6.1	Packing			To be packed in wooden boxes with card board and cutting with paper core in-between the coil max package weight 1500 kgs
6.2	Inner and outer diameter			Inner diameter 100/150/200/250/300/400/500mm can be optional based on product spec. and quantity,max outer diameter shall not exceed 1700mm
6.3	Rolled core material			Paper,aluminum,iron or none can be optional based on product specification or requirements
6.4	Coil orientation			Coil orientation in clockwise direction and eye to sky,anticloclwise can be optional
6.5	Packing way			Horizontal or vertical packing can be optional based on product specification and transfer safety
6.6	Marking			Each box to be legibly marked with the name of the manufacturer or supplier, the alloy designation of material,condition,dimensions and weight
6.7	Shipping tools			Ship goods by van to departune port then by sea to desitination port
6.8	Quantity variation			±10% variation with order quantity shall be acceptable

Previous : Aluminum Coil Next : PS Aluminium Base Sheet