Metallized Film | Buy Metallized Film from NuinTEK Co., Ltd., Korea (North)

Metallized Film Introduce

Metallized Film

Characteristic

nuinTEK's Metallized film is produced using the best base film passes an severe inspection. We are starting for sale the metallized film with Experience accquire through producing for several years.

metallized film is preserving the excellent oxide-proof and capacitance change property because high vaccum metallizing makes triple layer of Zn,Al etc.

Electrical Properties of Capacitor


Capacitance Change by Temperature	Dissipation Factor Change by Temperature 50Hz

Dissipation Factor Change by Temperature 1KHz	Insulation Resistance Change by Temperature

Shrinkage in Machine and Transverse Direction	Shrinkage in Machine and Transverse Direction

Outside diameter and length on Reel	Material Consumption (Strandard Capacitor:Assessed Value)

Marking and Packing

Roll

	Each roll has its own original Lot No. and its specification stamped with ink which has no position on the margin side of the roll. The loss end of the film is held in place by adhesive tape.
Label Print There shall be the following description on the label. Specification(Thickness x Slit width x Margin) Type Lot No. Weight	Vacuum Packing Each stacked pair is separated by plastic foam order to protect the electrode side. The piled rolls are packed in plastic bags with damp proof. After removal of the air, the bags are heat sealed.
Carton Box The plastic bags are packed into carton box.	Outer Packing For Sea Freight The carton boxes are put into wooden pallet and palletized with outcase for sea shipment.

Storage Conditions and Warranty Period

Storage Conditions
All types of metallzed films which made by nuinTek should be stored in nuinTek's original packing and kept from vibration and direct sunshine. Temperature and humidity should be maintained for 15~25°C and 65% RH respectively. Note that since a thin metallized layer is likely to be easily oxidized in the presence of moisture, the rolls shall be used as soon as possible following of the package.

Warranty period
nuinTek gurantees the quality of all types of metallized film made by nuinTek for six months following the shipment date from Korea provided that the rolls are unopened, in their original packing, and stored as described in section Storage Conditions.

Ordering Guide
All metallized film of nuinTek's type shall be represented in the following format. Type, thickness(µm) x Slit width(mm) x Free Margin(mm), Resistance, Outside Diameter. Ex : PAS-D, 5µm x 30mm x 2mm, 2.0 Ohm/â¡ ,180 Ø

How to Describe Lot No.
Lot No. is describe as follows.
1,2,3,4,5,6,7,8
1 : The number of machine
2: Production year
3,4: Production month
5,6 : Production date
7,8 : Batch number

Previous : Air Condition Compressor Capacitor Next : 1.6~12um Metallized Polypropylene Film for Capacitor Use