Chemical Composition
PTFE
Technical Parameters
|
Nature of the Product |
PTFE-0108A |
|
|
Appearance |
|
White Powder |
|
Particle Size μm |
|
|
|
|
Dv50 |
1-2 |
|
|
Dv90 |
4 |
|
Melting Point ℃ |
|
320±5 |
Characteristics and Purposes
Ø The micronized PTFE-0108A with white appearance and even particle size, ultra fine and has more delicate hand-feeling. Well dispersed, it can provide outstanding abrasion resistance and scratch resistance.
Ø It can make the products with very low friction coefficient when used in inks and coatings. PTFE-0108A with excellent abrasion, scratch resistance and slippery property.
Ø Its molecular weight is usually one percent of the commonly used PTFE resin, it not only keep the original excellent properties, but also has the advantages of high crystallization degree, good dispersion, and easy to mix with other materials.
Ø In printing inks, an additional amount between 0.1% ~ 3% of PTFE-0108A can significantly improve the sliding properties of ink, and make the products with perfect abrasion resistance, and avoid the adhesion of the paper products.
Ø When used in coatings, it can improve the lubricity, abrasion & corrosion resistance.
Ø In powder coating, PTFE-0108A provides outstanding scratch resistance.
Ø This product is compliance with new regulation of PFOA free rules (<25ppb).
Contents and Methods of Use
Ø In a variety of systems, the additional amount of the micronized wax is generally of 0.1 to 3%.
Ø Usually by a direct high-speed stirring, it can disperse in solvent-based coatings and printing inks.
Ø It can be added by a variety of grinding machines, high-shear dispersing device, and should pay attention to the temperature control when using the grind mill.
Ø Can carry out the decentralized processing to make the wax slurry with the wax powder concentration at 20-30%., then add it into the systems when needed, which can decrease the dispersion time.
Packaging and Storage
Ø Drum, net weight: 25kg / barrel.
Ø This product is non-dangerous goods.Please store it away from ignition sources and strong oxidants.
Ø Do not smoke while operating the micronized PTFE, avoiding it to touch the cigarette-burns for it can produce some toxic gases that maybe inhaled.
