Monocular outdoor thermal image telescope is an infrared camera that integrates surface temperaturemeasurement and real-time thermal image. The traditional inferred thermometer needs to measure every component one by one while it is not necessary for infrared imaging camera, thus saving time. The potential problems may be displayed on color display screen clearly. Moreover, the central point measurement cursor is used to locate quickly and accurately to measure the temperature of the target object.In order to increase the differentiation, the product is provided with a visible light camera. The thermal images and visible images are stored in the device and can be read through USB or stored in a computer to generate a report or for print.
Cleaning of the Products
Please use damp cloth or weak soap to clean the enclosure of the device. Don’t use abradant, isopropanol or solvent to clean.
The lens and screen should be cleaned with use of cleaning agents for professional optical glasses.
Lens Maintenance
Prevent damage of the infrared lens：
● Clean the infrared lens carefully. The lens is provided with refined anti-reflection coating.
● Don’t clean with force to prevent damage of the anti-reflection coating.The selectable color palette.
● Use a cleaning solution for lens maintenance, such as alcohol-based commercial lens cleaners, alcohol, and a lint-free cloth or paper towel. Compressed air tanks can be used to remove loose particles.
Clean the lens:
● The compressed air tank or dry nitrogen ion gun (if applicable) may be used to blow the loose particles on the lens surface.
● Dip the lint free cloth in alcohol.
● Squeeze the excessive alcohol in the cloth or apply the lint free cloth on dry cloth lightly.
● Wipe the lens surface by making circular motion. Then discard the cloth.
● If it is necessary to repeat above step, please use new cloth to dip with the cleaning solution to wipe.
Charging of the Battery and Description
Use USB data line to charge:
● This product has a built-in rechargeable battery.
● When the battery level is low, the top right of the screen will display.Please charge in time through TEPY-C USB interface.
● Pull off the USB line after fully charging.
Use recharge stand to charge:
1.Unscrew the battery cover and take out the batteries.
2.Used the charger from the original manufacturer to charge the batteries. Install the batteries properly according to the polarity as shown on the charger.
3.After it is fully charged, disconnect power supply for the charger, and remove the batteries.
Prompt: When this product lies idle for long, it shall be charged at least every three months to prevent irreversible loss of capacity due to too low battery power arising from its own discharge as it is kept too long.
Installing the Battery
(1) Turn the battery compartment knob counterclockwise to open the battery compartment cover;
(2) Install the battery in strict accordance with the positive and negative pole directions of the battery on the battery compartment cover;
(3) Close the battery compartment cover, and turn the battery compartment knob clockwise until it is locked up. Note: 1. Please do not use the battery whose insulating layer is damaged; 2. If the battery’s positive and negative poles are wrongly connected, the device will be unable to work, and that will damage the battery.
Performance Index
| Product model | HT-C18 | ||||||
| Infrared | |||||||
| Detector type | Vanadium oxide uncooled infrared focal plane | ||||||
| Resolution ratio | 384x288 | ||||||
| Pixel size | 12μm | ||||||
| Focus length | 25mm | 35mm | 54mm | 75mm | |||
| Field angle | 10.5°×7.9° | 7.5°×5.7° | 4.9°×3.7° | 3.5°×2.6° | |||
| Work band | 8~14μm | ||||||
| NETD | ≤ 40mk@25℃,@F/1.0 | ||||||
| Frame rate | ≤50Hz | ||||||
| Focusing mode | Manual | ||||||
| Detection range | |||||||
| Character 1.7mx0.5mx0.3m | 2361m | 3306m | 5100m | 7083m | |||
| Vehicle 4.5mx2.0mx1.5m | 6250m | 8750m | 13500m | 18750m | |||
| Perception distance | |||||||
| Character 1.7mx0.5mx0.3m | 590m | 826m | 1275m | 1771m | |||
| Vehicle 4.5mx2.0mx1.5m | 1563m | 2188m | 3375m | 4688m | |||
| Display | |||||||
| Display screen type | OLED | ||||||
| Resolution ratio | 1440×1080 | ||||||
| Display size | 0.39inches | ||||||
| Electronic zoom | 1×/2×/4×/8× | ||||||
| Diopter regulation | ±5SD | ||||||
| Palette | White hot, Black hot, Fire hot, Rainbow, Iron red, Cold color |
| Hot point track | Supported |
| Picture in picture | Supported |
| Language | Simplified Chinese, Traditional Chinese, English, Russian and German |
| Storage | |
| Capacity | Built-in 16G EMMC(The system takes up some space and it is 13.8G actually) |
| Photographing | Supported |
| recording | Supported |
| Image/video format | JPG/MP4 |
| Interface | |
| USB interface | Charging/export image and video |
| Power | |
| Detachable recharge- able lithium battery | 1400mAh×2(battery model 18350) |
| General technical index | |
| Overall power consumption | ≤1.8W |
| Time of endurance | ≥5 hours |
| Work temperature | -20℃ ~ +60℃ |
| Storage temperature | -30℃ ~ +70℃ |
| Impact | ≤1000G |
| Protection grade | IP66 |
| Size/weight | |
| Product size | 198x57.5x64.3mm |
| Product weight | 580g |
| Product model | HT-C19 | ||||||
| Infrared | |||||||
| Detector type | Vanadium oxide uncooled infrared focal plane | ||||||
| Resolution ratio | 640×512 | ||||||
| Pixel size | 12μm | ||||||
| Focus length | 25mm | 35mm | 54mm | 75mm | |||
| Field angle | 17.5°×14.0° | 12.5°×10.0° | 8.1°×6.5° | 5.9°×4.7° | |||
| Work band | 8~14μm | ||||||
| NETD | ≤ 40mk@25℃,@F/1.0 | ||||||
| Frame rate | ≤50Hz | ||||||
| Focusing mode | Manual | ||||||
| Detection range | |||||||
| Character 1.7mx0.5mx0.3m | 2361m | 3306m | 5100m | 7083m | |||
| Vehicle 4.5mx2.0mx1.5m | 6250m | 8750m | 13500m | 18750m | |||
| Character 1.7mx0.5mx0.3m | 590m | 826m | 1275m | 1771m | |||
| Vehicle 4.5mx2.0mx1.5m | 1563m | 2188m | 3375m | 4688m | |||
| Display | |||||||
| Display screen type | OLED | ||||||
| Resolution ratio | 1440×1080 | ||||||
| Display size | 0.39inches | ||||||
| Electronic zoom | 1×/2×/4×/8× | ||||||
| Diopter regulation | ±5SD | ||||||
| Palette | White hot, Black hot, Fire hot, Rainbow, Iron red, Cold color |
| Hot point track | Supported |
| Picture in picture | Supported |
| Language | Simplified Chinese, Traditional Chinese, English, Russian and German |
| Storage | |
| Capacity | Built-in 16G EMMC(The system takes up some space and it is 13.8G actually) |
| Photographing | Supported |
| recording | Supported |
| Image/video format | JPG/MP4 |
| Interface | |
| USB interface | Charging/export image and video |
| Power | |
| Detachable recharge- able lithium battery | 1400mAh×2(battery model 18350) |
| General technical index | |
| Overall power consumption | ≤1.8W |
| Time of endurance | ≥5 hours |
| Work temperature | -20℃ ~ +60℃ |
| Storage temperature | -30℃ ~ +70℃ |
| Impact | ≤1000G |
| Protection grade | IP66 |
| Size/weight | |
| Product size | 198x57.5x64.3mm |
| Product weight | 580g |
Introduction to Product Structure
| ① | Photographing/ recording/up | ② | Pseudocolor/picture in picture/right key |
| ③ | Menu/Close UI/enter | ④ | Diopter adjustment |
| ⑤ | Focal length adjustment | ⑥ | Power/return |
| ⑦ | Type-C interface | ⑧ | Battery compartment |
| ⑨ | Brightness/Hot point/ Track/Left key | ⑩ | Zoom In/Refresh/ Shutter/Down key |
Key Description
| Key/state | Press | Hold down | |
| Power
key | Main
interface | It can be configure as
screen off or freeze frame of picture through the menu. | Pop out the
shutdown prompt box to carry out shutdown. |
| Menu
interface | Return | ____ | |
| Photo
key | Main
interface | Photographing | Start recording/ stop recording |
| Menu
interface | Upward direction | ____ | |
| Brightness key | Main
interface | Brightness adjustment | Hot point tracking |
| Menu
interface | Leftward direction | ____ | |
| Zoom in key | Main
interface | Zoom in(1x/2x/4x/8x) | Refresh shutter |
| Menu
interface | Downward direction | ____ | |
| Pseudocolor key | Main
interface | Pseudocolor switching | Open picture in
picture/close picture in picture |
