Nurphalt is a cold asphalt and is a guaranteed pothole patching material. It is a special blend of asphaltic polymer adhesives and carefully graded aggregates. It is not just a pothole patch but is guaranteed pothole repair. It will remain in the repaired areas in the same condition as when the initial repair was done. It will not rut, ravel, or shove in the repaired area. Requires no mixing or heating. It can be used to permanently patch when the surface temperatures are as low as -40° or as high as 168° Fahrenheit. It can be used to permanently patch when the surface temperatures are as low as -40° or as high as 168° Fahrenheit. It can apply to any equipment and skilled person. It will not shrink after it cures. It is a rapid cure patching material offered by other manufacturers. It has a shelf life of one year from the date of purchase. It is for asphalt or concrete pavement repair regardless of the weather condition.

Applications:

It can be used as a permanent patch on cracks or broken areas of any size, shape, or depth in concrete on:

· Interstate Highways

· City, County, and State Roads

· Airport Runways

· Parking Lots

· Bike Trails

· Jogging Trails

· Golf Cart Paths

· Sidewalks

· Boat Ramps

· Wheelchair Access Ramps

· Residential Driveways

· Railroad Crossings

· Utility Cuts

· and more

Nurphalt (Cold Asphalt) is the easiest and most economical permanent pothole repair system available:

No mixing or heating–ready to use. No special equipment is needed–just use a broom and shovel. No cutting or priming of a hole or crack. Adheres to asphalt, concrete, or masonry surfaces, not tires.

Special Features

Nurphalt (Cold Asphalt) is the only rapid-curing asphaltic concrete patching material in existence. It will rapidly achieve a very high stability and in-place allowing a repair to be made in an unconfined area. There will be no shoving, rutting, or migrating in the patched area.

It is non-hazardous and has a neutral PH, containing no acids allowing for permanent patching to be done on concrete areas. It can be used when temperatures are as low as -40˚ or as high as 168˚ Fahrenheit without the addition of any tack oil or bonding agent. It is NON-HAZARDOUS, NON-CAUSTIC, and NON-FLAMMABLE.

Application for a Path Hole Repair

· Ensure the area is clean of debris

· Seal the pothole edges and substrates using Nurphalt(Cold Bitumen)

· Fill in hole with Nurphalt(Cold Bitumen)

· Tamp down

Application for First-Time Permanent Repairs

1. Saw cut a ‘picture frame’ around the repair or reinstatement area

2. Ensure the area of clear of debris

3. Seal vertical edges and substrate with Nurphalt(Cold Bitumen)

4. Apply the product to a depth of approximately 45mm / 1.77in and compact it to 30mm / 1.18mm in order to achieve your first layer.

5. Re-apply Nurphalt(Cold Bitumen) to vertical edges before a second layer of Nurphalt(Cold Bitumen) is applied

6. Repeat step 4 to achieve the 60mm / 2.36in depth

PACKAGING

Nurphalt (Cold Asphalt) is supplied in 25 kg pails.