Nylon/PES/PTFE/ PVDF Membrane capsule filter 0.2 micron
Advantages:
1) A variety of volume for choices
2) Quick installation and convenient use
3) Widely applicability
4) Suitable for small doses of liquid of filtration
| Nominal size | 1inch |
| Outer diameter Total length | 58mm 97mm |
| Filtration area | 400cm 2 |
| Housing material Center pole material Support layer material Vent O-ring Material | Polypropylene Polypropylene Polypropylene Silicone |
| Vent /Drain Outlet Diameter: | Φ 3/8 '' NPT |
| Maximum Operating Pressure Difference | 4 bar (58 psi) at 25°C 5.5 bar (80 psi) at 25°C |
| Housing pressure | 5.5 bar (80 psi) at 25°C |
| sterilization | Can be sterilized by Gamma radiation up to 45KGy Can be sterilized by high-pressure steam at 126°C for 30 minutes three times (in-line steam sterilization is not available) |
| Bacterial Endotoxin | According to the bacterial endotoxin test method stipulated in the general rule (1143) of the Chinese Pharmacopoeia 2020 edition. As determined by Limulus reagent (LAL), the aqueous extract content is < 0.25 EU/mL. |
| Microbial Challenge Test | >10 7 cuf/cm 2 ; according to ASTM® test method passed Pseudomonas diminuta (B. diminuta) ( ATCC® 19146) |
| Biosecurity | All materials meet USP <88> Reaction Test Standards for Plastic Materials Class VI-70°C. |
| TOC/Conductivity | TOC value≤0.5mg/L, conductivity value≤1.3us/cm. According to the Chinese Pharmacopoeia 2020 Edition, the general rule (0682) the determination method of total organic carbon in pharmaceutical water and the general rule (0681) the determination method of the conductivity of pharmaceutical water. |
| Cleanliness | According to the light inspection method stipulated in the general rules (0904) of the Chinese Pharmacopoeia 2020 edition, no fibers and other visible foreign matter were detected in the filtrate. |
| Integrity Test | Bubble point, diffusion flow, water intrusion; please consult the sales engineer of Hengshui Company for detailed parameters |
| Series | Membrane material | Filtration accuracy | Length | Interface form | Sterilized form | Packing |
| KC | S = hydrophilic P ES | 010=0.10 μm | 1=1inch | L 1/4'' Tower type | G = Resistance to Gamma Radiation Sterilization Z = Autoclave only W=Sterile type | 1=1Pcs/Box |
| ST = Hydrophobic PES | 020=0.20 μm | |||||
| T=hydrophobic PTFE | 045=0.45 μm | |||||
| L T = Hydrophilic PTFE | 100=1.0 μm | |||||
| V=hydrophobic PVDF | 300=3.0 μm | |||||
| LV=hydrophilic PVDF | 500=5.0 μm | |||||
| M=MCE | ||||||
| NL= Nylon | ||||||
| P=PP |
Our Factory
Our factory was established in 2011. It is one of the leading filter cartridge manufacturers in China offers a wide range of filter cartridges ,filter housings,filters that cater to multiple industrial applications.Our company adheres to the business philosophy of "Customer service, Quality first", and provided filtration, separation and purification solutions for the global biological customers in the fields of pharmaceuticals, food and beverage, new energy, microelectronics industries.
FAQ
1. Q: Are you a trading company or a factory?
A: We are a factory with 12 years experiences.
2. Q: What 's your lead time?
A: Normally 7-20 working days according to your quantity.
3. Q: May I have samples?
A: Sure, of course.
4. Q: Can you OEM ?
A: Yes, we can.
5. Q: What's your MOQ?
A: Normally, 20 PCS/item. If less than the MOQ also warmly welcome. We hope long-term co-operate.
6. Q: Can you produce according to sample?
A:Yes, we can produce according to your samples or technical drawings.
