Function and Technology Character Introduction:

1. The LED film screen uses specific bare chips to fix the components on the high-transmittance PCB board. Through a special capping process, the display module is integrated into a minimum thickness and high light transmission optical lens substrate with a thickness of only 1-3mm.

2. It can be connected to PC and network to display content, and it can also be remotely controlled through VPM+ADSL.

3. Fully transparent vision, excellent transparency High light transmittance (60%-85%), the glass is still clearly visible after filming, and has no adverse effect on the original design. When the LED is turned off, the film is not obvious and is completely integrated into the glass.

4. The thickness of the transparent film media display is only 1.2mm, which is seamlessly integrated with the glass curtain wall. Using its self-adhesive transparent film can be easily installed (with minimal structure required) on any existing glass surface. This flexible display is also suitable for various curved glass and round surfaces.

5. AVI, MOV, MPG, DAT, VOB and other file formats are rich, and it has three display modes: VGA+VIDE and VGA. There are interfaces for audio signals and video signals.

6. 4096-level gray scale control system, with more than 16.7 million colors, brightness, contrast, saturation, and chromaticity can be adjusted manually and by sensor, with a range of 256 levels.

7. Synchronously display various texts, texts, graphics, pictures, videos, two-dimensional, three-dimensional cartoons and other information with the PC.

8. The picture adjustment adopts Line-Double technology.