PECIFICATIONS

Range: -1999 to 1999mV

Resolution: 1mV

Accuracy : ±5 mV

Batteries :4 x 1.5V alkaline

Environment: 0 to 50℃,RH 95% max;

Dimensions :175x41x23mm

Weight :72g

Features

1. Easy-to-use pocket ORP tester is equipped with a platinum sensor.

2. 1 point offset calibration allows adjusting the displayed value to a known standard.

3. Auto-Hold function freezes stable reading for easy viewing and recording.

4. Auto-Power Off helps user effectively conserve battery life.

5. Replaceable electrode module reduces maintenance and replacement cost.

6. Reset feature automatically resumes all parameters back to factory default settings.

7. Waterproof feature to ensure complete protection in harsh environments.

OPERATION

·Remove the protective cap. Do not be alarmed if white crystals appear around the cap. This is normal with ORP electrodes and they dissolve when rinsed with water.

·Turn the meter on sliding the switch on the top.

·Immerse into solution up to the max immersion level.

·Stir gently and wait until the display stabilizes.

·After use, switch off ORP meter,, use the water clean the electrode and replace the protective cap.

Do not use distilled or deionized water for storage purposes.

·Large fluctuations in readings could be due to lack of calibration, dry electrode or rundown batteries.

Attention :during 2-3 weeks, put electrodes in 3mol/L KCL solution for 12 hours, to make sure the reading within accuracy.