Quick Detail:
Alloy materialGood heat resistanceHigh bending strengthHigh processing finishHigh stabilityhigh-precision
Description:
tungsten carbide inserts turning is made of high-quality hard alloy material, which is not easy to rust and is durable.The tungsten carbide inserts is hard and sharp, with faster cutting speed and higher efficiency.Suitable for turning and finishing steel, stainless steel, cast iron and non-ferrous materials.80 ° diamond single-sided blade with chipper, 10 pieces of cemented carbide blades in plastic box, easy to store.
Specifications:
| Brand | BWIN |
| Model | Ccmt09t304 Ccmt09t302 Ccmt060202 Ccmt060208 |
| Color | Yellow/Fuchsia/Black//Two-color coating/Cermet coating/Brown |
| Workpiece | Cast iron/Steel/Stainless steel/Aluminum |
| Type | Internal Turning Tool |
| Material | Tungsten Carbide Inserts |
| Processing Type | Medium Cutting |
| Feature | High Strength |
| Good Heat Resistance | |
| High Processing Finish | |
| High Finish Polished | |
High Stability | |
| Standard | ISO |
| Quantity | 10pcs/box |
| Weight | 0.015kg |
| Package | Plastic Box |
| Customized Support | OEM, ODM |
Lead Time:
| antity(pieces) | 1 - 3000 | >3000 |
| Lead time (days) | 7 | To be negotiated |
I(mm) | d(mm) | t(mm) | d1(mm) |
06 | 6.35 | 2.38 | 2.8 |
09 | 9.525 | 3.97 | 4.4 |
12 | 12.7 | 4.76 | 5.5 |
Notice:
The tungsten carbide inserts shall not be collided or dropped on the ground and must be handled with care.Before installing the carbide blade, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.After installation, it is necessary to confirm whether the central hole of the carbide blade is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.When using, do not exceed the specified high speedWhen the tungsten carbide inserts is not used, hang the blade vertically on the dry shelf.
Applications:
Our tungsten carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following:
FAQ
1. Flank Wear? Higher cutting resistance,Notch wear on flank,Poor roughness of surface, or deterioration of accuracy.Soft grades,Excessive cutting speed,Small flank angle,Low feed.
Select a higher,wear-resistant grade,Reduce cutting speed,Increase flank angle,Increase feed.
2. Crater Wear? Uncontrolled chip,Poor surface quality,when finishing High speed processing carbon steel
Soft grades,Excessive cutting speed,Excessive feed,The strength of chip breaker Insufficiet.
Change to a higher wear-resistant grade,Reduce cutting speed,Reduce feed,Select a higher strength chip breaker.
3. Chipping? Sudden fracture of cutting edge(rake face and flank),Instability insert life
Toughness insufficient,Excessive feed rate,Strength of cutting edge insufficient,Instability of the tool.
Select a tougher grade,Decrease feed rate,Increase honing of cutting edge(chamfering to rounding),Increase the stability and setting angle
4. Insert Fracture? Cutting resistance increased Poor surface roughness.
Toughness insufficient,Excessive feed rate,Strength of cutting edge insufficient,Instability of the tool.
Select a tougher grade,Decrease feed rate,Increase honing of cutting edge(chamfering to rounding),Increase the stability and setting angle.
5. Plastic Deformation? Variation of dimension Nose wear,cutting edge drape or passivating.when processing alloy steel Poor surface roughness
Soft grade,Excessive cutting speed,Excessive cutting depth and feed rate,Overheat on cutting edge.
Select a higher red hardness cutting material,Decrease cutting speed,Decrease cutting depth and feed rate,Select a higher thermal conductivity cutting material(CVD+sufficient coolant).
6. Build-Up-Edge? Workpiece dissove with Cutting edge Poor surface roughness when finishing,Cutting resistance increased,Cutting soft materials.
Cutting speed too low,Cutting edge obtuse,Unsuitable tool material. Increase cutting speed,Increase rake angle,Select small sticking force.
