Properties:
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
Application:
1,HDPE film grade is widely used in the production of packing bag, film and so on.
2,Blow molding grade for making various bottles, cans, tanks , barrels
Injection-molding grade is for making food cases, plastic trays, goods containers.
3.Blow film product:Foodstuff packing bag,groceries shopping bags, chemical fertilizer lined with film, etc
4.Extruded product: Pipe,tube mainly used in gas transportation, public water and chemicals transport, such as building materials, gas pipe, hot water drain pipe etc: sheet material is mainly used in the seat, suitcase, handling containers.
Specification:
HDPE | Unit |
|
Mass density | g/cm³ | 0.941-0.959 |
Melt flow Rate(190 Centigrade /2.16kg) | g/10min | ≤1.0 |
Tensile yield strength | MPa | ≥19.0 |
Flexural modulus | Mpa | ≥965 |
Elongation@ break | % | ≥400 |
Impact Embrittlement temperature | Centigrade | MAX -118 |
Dielectric Constant | 100KHZ | 2.32 |
1MHZ | 2.31 | |
Loss Tangent | 100KHZ | MAX 0.0001 |
1MHZ | MAX 0.0001 | |
Volume resistivity | OHM-CM | MIN 1x10 15 |
