RENOVA
Features of Products
Conventional exhaust gas reduction devices, such as DPF (Diesel Particulate Filter), EGR (Emission Gas Recirculation), SCR (Selective Catalyst Reduction), and Catalyst Converter are aimed to reduce the exhaust emissions after the fuel is burned in the engine, while RENOVA reduces the generation of such substances at the combustion stage by the force of wave energy.
Therefore, it can be easily confirmed that if RENOVA is mounted in an old car, its exhaust gas will be reduced to a new car level by the increase of an engine efficiency.
Material and Composition of Products Material: Galvanized hexagonal metal nut Quantity: 4 or 6 nuts with "RENOVA" letters engraved Specifications: M6 x H18mm, M8 x 20mm Product configuration by starting voltage for motors Mounting accessories provided free of charge
- bolts (M6 x 30mm, M8 x 30mm)
- Sand Paper
| Division | Engine | Body | Battery Terminal | Total | |
| Positive | Negative | ||||
| Vehicles with 12V | M8 x 1ea | M8 x 1ea | M6 x 1ea | M6 x 1ea | 4ea |
| Vehicles with 24V | M8 x 1ea | M8 x 1ea | M6 x 2ea | M6 x 2ea | 6ea |
Our Suggestion on Product Inquiries
At the time of product inquiry or placing an order, be sure to identify the battery amperage (24 hours rule) to which our product will be installed.
This is because the RENOVA products by battery ampere is produced . Using the RENOVA products that are not compatible with battery amperes gives little or no effect.
Meaning of Letters and Numbers Engraved on The Surface of a Nut
| Type | The ampere of a mounted battery | Where to install |
| 60A Engine | 60Ah | Cylinder block of an engine |
| 60A Body | 60Ah | Metal part of an automobile body |
| 60A(-) | 60Ah | Negative terminal of battery |
| 60A(+) | 60Ah | Positive terminal of battery |
Effect of After Installation Main Effects
-Reduced Gas Emissions, Nox in special
-Improved Engine Horsepower & Torque
-Increased Fuel Efficiency Other effects
- Improved Throttle Response
- Improved Engine Kick Over
- Stabilized RPM at Idle
- Mitigated Automatic Transmission Shifting Shock
- Reduced Electrical Noise
- Enhanced Light Brightness
- Improved Car Audio Base Sound and Decreased Noise
- Extended life span of electrical devices
Features and Advantages Leading-edge Technology Outstanding Performance Best Cost Effectiveness Easy Installation None Failure or Trouble & Long Lifespan
Evidence of Improved Engine Performance
1. Data proving an emission reduction effect
Vehicle registration number: Busan 31 Da 5700 Engine displacement: 2,400cc Maker: Kia Motors Production Year: 2003 Fuel Type: LPG Inspection Company:
Hyupsin Automobile Service Co., Ltd. in Busan Phone: 051-866-5405
| Inspection date | Cumulative mileage(km) | CO (%) | HC (PPM) | Nox (PPM) |
| 2009.04.28 | 70,593 | 0.0 | 7.0 | 91.0 |
| 2009.04.23 | 211,450 | 0.0 | 7.0 | 11.0 |
| Remarks | Reduced value | - | 4.0 | 80.0 |
| Reduced value | - | 57.1 | 87.9 |
2. Changes in engine power measured with Chassis Dynamometer Vehicle name: SM525V Maker: Samsung Motors Engine displacement: 2,500cc Fuel type: gasoline Measurement company: Dynohouse in Yansan-si, Korea
| Division | RPM | Power(ps) | Torque(kg.m) |
| Before mounting | 5,500 | 128.4 | 16.8 |
| After mounting | 5,500 | 133.6 | 17.4 |
| Difference | 0 | +5.2 | 87.9 |
How to Mount
■ Precautions before installation Mount it on metal parts. Do not install on plastic or urethane part. Clean foreign objects (paint, rust, dust) with grinder, sand paper, etc. and apply highly conductive grease to prevent rust. Ensure that the product matches a battery capacity (ampere). Although a nut size for a automobile body and for an engine is M8, the M6 bolt can be mounted on a 6mm bolt hole because the performance will be the same in either bolt.
■ Where to install Engine cylinder block Automobile body Battery Positive Terminal Battery Negative Terminal
■ Mounting sequence Turn the engine off and remove the key. Disconnect the ground wire from the battery negative terminal. Unscrew the nut that holds the battery positive terminal and the (+) electrode, and fix the terminal with the RENOVA Nut engraved with the (+) mark. Unscrew the nut that holds the battery negative terminal and the (-) electrode, and fix the terminal with the RENOVA Nut engraved with the (-) mark.
Select the point of the car body where the product will be mounted, remove foreign objects, and apply Highly Conductive Grease. Fix with a bolt the RENOVA NUT engraved with the 'Body' mark.
Select the point where to mount the product on the engine cylinder block (or Air Intake Manifold), remove foreign objects, and fix with a bolt the RENOVA NUT engraved with the 'Engine' mark . Connect the ground wire to the battery minus terminal. Reset the ECU.
■ Problems from and solutions for incorrect mounting If the battery terminal is loose, the vehicle may not start or the engine may be turned off while driving. If a foreign object is not removed from the mounting position on an engine or a vehicle body, or loosely fixed, the engine output will be weak. Solution: Re-install after reading the manual
※ RENOVA can be customized to Nuts of various sizes according to the requirements of a customer.
