The sand and dust test chamber, driven by a fan to push a certain concentration of sand and dust to blow over the surface of the test piece at a certain flow rate, simulates the typical environmental conditions of nature at any time without being limited by time and season, to evaluate the test specimens’ ability to protect against the infiltration effects of dust particles, the ability to defend against abrasive or blocking effects of grit, and the ability to store and operate when exposed to dry sand or a dusty atmosphere.Technical parameter:
|
Model |
HD-500 |
HD-800 |
HD-1000 |
|
Volume |
512 L |
800 L |
1000 L |
|
Internal dimension (D*W*H) |
800*800*800 mm |
900*900*1000 mm |
1000*1000*1000 mm |
|
Performance |
|||
|
Metal screen standard spacing |
50 μm |
||
|
Spacing between lines |
75 μm |
||
|
Talcum powder amount |
2 kg/m3～4 kg/m3 |
||
|
Blowing dust cycle |
Cycle control, can control the total test time, and can also program the blowing dust time and stop time for cycle operation. |
||
|
Material |
|||
|
Shell material |
Cold rolled sheet steel, rust-proof and spray plastics on surface |
||
|
Internal materials |
SUS304 stainless steel |
||
|
Working chamber structure |
Funnel-shaped, adjustable vibration period; the dust flies freely, falls and gathers near the suction hole. |
||
|
Control system |
|||
|
Controller |
Programmable controller, color LCD touch screen |
||
|
Operation mode |
Simple operation, convenient setting, blowing dust time can be set, cycle period can be adjusted, time can be adjusted. |
||
|
Safety device |
Over-temperature protection, grounding protection, etc. |
||
|
Power supply |
AC 220V/380V±10%, 50 Hz±0.5Hz |
||
