We supply wedgewire screen bend with micron mesh sizes per the drawings, with required dimensions and mesh sizes.

Sieve Bend Screen

General specs

Screen width:12 inches

Screen length:17.5 to 18 inches long

Curve: approx 1 inch in 17.5 inches

Wire size: .040 inches

Wire Gap: .012 inches

Galvanized Sieve Bend

Galvanized metal sieve screen material with a 3/8-inch opening. Screen 5-feet x 5-feet, or othe sizes.

Wedge wire sieve with the following specs

Slot opening = .5mm

wire width = 1mm

Screen size:

562mm wide Slot openings are parallel to width

635mm long

Wedge Wire Sieve and Rotary Filter Parts

Sieve Bends and Round Barrel Sieve Mesh for Water Filtration products for USA

For the Round Barrel Sieve, 24 Inches length, with a Diameter of 16 or 18 Inches with water flow from the inside to outside.

Sieve Bend: width of 12 to 24 Inches and length 18 to 24 Inches.

Can be designed around the size of the Sieve

SS Wedge Wire Seive Bend Filter

Flow at least 3000 gph

Seperate solids down to 300 microns

To keep the seperated solids out of the water flow.

Sieve Bend Screens with no frames for prefilter

Stainless steel wedge wire seive 350mm wide by 600mm

Arc at a radius of 675mm, filtration to 300 micron.

Carbon Platelet Sieve Screen

Arc sieve products for carbon (coconut shell derived) platelet testing.

0.25mm Wedge Wire Sieve Bend

0.25mm wedge wire sieve bend approximately 300mm x 500mm.

Used for filtering

Sieve bend screens to pass 1000-2000 GPM at a 15-20% solid rate. 30 mesh wedge wire 2-3 mm thick to allow for sufficient wear.

Wedge Wire Sieve (Bend Screen Type )

30-600mm OD Wedge Wire Curved Plate