Product Description Single Phase Inverter with Convert DC Power to AC Power and AC charger 1: Solar Power Inverter with DC Voltage 12V, 24V, 48Vdc option 2: Inverter with good price for laptop 3: Inverter Share LED & LCD in One Model 4: Inverter AC with110v pure sine wave inverter Inverter Application UPSEN Power Star Series Inverter can be used for various home appliances, office equipment, Solar power system, and other equipments which use single phase power Inverter Key Features 1: Pure sine wave output (THD< 3%), available for sensitive loads 2: High efficiency up to 95% under line mode, and 88% for Battery Mode 3: Fast and powerful charger with 35A and 70A 4: 4-step progressive charging, 7 battery type selector 5: Accept generator's energy output 6: Automatically transfer between battery and line modes 7: Microprocessor control guarantees high reliability 8: Bypass without battery connected 9: Remote control function 10: Protection against: Over load, over temperature, over charging, low battery 11: Reverse connection(optional by hard connector) 12: Blackouts Power Star Series Model No. PS1000 PS2000 PS3000 PS4000 PS5000 PS6000 Nominal Power 1000W 2000W 3000W 4000W 5000W 6000W AC Input Waveform Pure Sine Wave Voltage 120VAC/230VAC Acceptable Voltage 194-243VAC\164-243VAC(wide mode) Line Low Transfer 85V±4%/184(154 wide mode±4%) Line Low Return 95V±4%/194(164 wide mode±4%) Line high Transfer 135V±4%/253±4% Line high Return 127V±4%/243±4% Frequency 50Hz or 60Hz (Auto sensing) Line Low Transfer 47Hz for 50Hz, 57Hz for 60Hz Line high Transfer 55Hz for 50Hz, 65Hz for 60Hz AC Output Waveform Pure Sine Wave (bypass mode sync to input) Voltage 120/220/230/240VAC (bypass mode sync to input) Voltage Regulation ±10%rms (bypass mode sync to input) Frequency 50Hz±0.3Hz (bypass mode sync to input) Peak Power 3 times of rating power Short Circuit Protection Yes,shutdown after 10ms Power Factor 0.9-1.0 DC Input BatteryVoltage 12V/24V 12V/24V/48V 24V/48V Minimum Start Voltage 10V for 12V,20V for 24V,40V for 48V Low Battery Alarm 10.5V for 12V,21V for 24V,42V for 48V Low Battery Transfer 10V for 12V,20V for 24V,40V for 48V High Voltage Alarm 16V for 12V,32V for 24V,64V for 48V Max Charging Current 35A/70A Over Charge Voltage 15.7V for 12V,31.4V for 24V,62.8V for 48V Transfer Efficiency Line Mode > 95% BatteryMode >88% power saver Available when the load is less than 25 Watts Indicators 7-LED Display From the right to the left,LED1 line mode (green lighting) LED2 inverter mode (green lighting). LED3 charging mode (yellow lighting)/ LED4 Fully charged (green lighting). LED5 over heat shutdown(red lighting)/LED6 Overloaded shutdown(red lighting)/LED7 Saving Mode (green lighting) 3-LED Display Charging Mode(green lighting)/inverter mode(green lighting)/ Alarm (red lighting) Switch selector Saving Mode is on/off when push the switch forwards/backwards, keeping it horisontal is turning the inverter off. Audible Alarm Sounding when the heatsink's tem is over 105Cand shutdown after 30 seconds. Protections low battery/over charging/over temp/over load Communications RS-232/USB(custom-made) Enviromental Operating Environment 0-40C,0-90%RH(non-condensing) Audible Noise