Smartsolo Wireless Seismic Sensor/ Seismic Acquisition Nodal Geophone
Based on the High-quality seismic sensors DT-SOLO, SmartSolo geophone is specially designed for single point receiver applications. It is well known to the seismic industry and is widely adopted by major contractors and equipment manufacturers in the world wide.
High Sensitivity
· Greater Savings
· High Spurious Frequency
Low Cost per Channels
· with Light Weight 2.4kg including battery and spike
· （ to 64GB High-sensitivity DT-SOLO Sensor Technology
· General Specification
Sample intervals: 0.25, 0.5, 1, 2, 4 milliseconds
DC blocking filter: 1Hz to 10Hz, 1Hz increments or DC Removed
~ +70 Data Storage: 32 GB (can be expanded to 64GB)
Physical Size: 103mm (L) × 95mm (W) ×187mm (H) (w/o spike)
℃ Recharge Time： < 6 hours
Weight：1.7kg (Including internal battery and spike)
：15 days Continuous
Acquisition Performance
Distortion： <0.1% 12Hz, (0° ~ 10°)V tilt. <0.15%, (0°~3°) H tilt
Remark：All parameters are specified at +22 Channel Performance
Dynamic Range：125dB 2ms Gain 0dB
Common Mode Rejection: >100dB
Timing Accuracy: ±10µs, GPS Disciplined
Frequency Response: 0~1652Hz
