The tank body of Guanchao spiral unloading belt conveyor adopts an all-steel welded structure. The side box of the tank body is made of 3mm thick iron plate. There are bearing mounting holes on the side of the tank body, so there is no need for additional load-bearing plates. Both ends of the machine are elongated by 9.5mm.
Save Space:
The vertical spiral unloading belt conveyor uses its special structure, which requires relatively high vertical space, but occupies very little horizontal space.
Durable all Steel construction:
Most parts are made of metal for durability
Custom designed for the particular operation:
Due to the limitation of site, usage and other factors, it needs to be modified on the basis of standard machines to meet the actual needs of customers. Custom unloading belt conveyor for customers.
Spiral unloading belt conveyors can save a lot of space and manpower. Spiral belt conveyors can continuously move goods of all shapes and sizes without jamming, slipping or tipping. Unpackaged products like cartons, bags, buckets can be easily transported without any problems. Even large inclinations can be applied.
Chain Driven Spiral Belt Conveyors are designed for reliable operation in heavy duty applications such as: high speed, high circulation, sudden loads on the belt, harsh environments (temperature changes, contamination above and below the belt). Positive chain drive systems are immune to the following conditions that can damage friction drive belt conveyors (for example: incorrect belt tension, temperature changes, contamination above or below the belt, etc.). There will never be any destructive end roll rotation due to improper adjustment. Chain-driven belt conveyors can withstand a lot of neglect and abuse and still work just fine. It is the perfect solution for conveyor lines.
Spiral belt conveyor function is not affected by fluctuations: in the environment or load, precise belt tensioning and end pulley alignment are not required, and contamination of the conveyor belt will not cause loss of drive traction.
High speed capabilityLow noise operationEasy to maintainLow lifetime costPractical designWide conveying width availableLow belt tension for long component lifePositive drive belt system means no end roll slipCustom design for your specific application
The structure is relatively simple and the cost is low.Reliable work, easy maintenance and management.The size is compact, the section size is small, and the floor area is small. It is easy to enter and exit hatches and carriages during unloading and unloading operations in ports.It can realize sealed transportation, which is conducive to the transportation of easy-to-fly, hot and strong-smelling materials, which can reduce environmental pollution and improve the working conditions of port workers.Easy to load and unload.
Tank installation
All-steel welded structure, the sides of the tank body and the sliding bed are made of 3MM, thick iron plate, there are bearing mounting holes on the side of the tank body, so no additional load-bearing plate is needed, and the outer radius of the tank body is longer than the two ends of the conveyor. 9.5MM.
Chain cover
Made of steel with mounting slots for quick and easy disassembly.
Tank height
Standard height———-216MM;
Conveying surface width greater than 1 meter————-216/305MM;
The outer radius of conveying is greater than 2210MM———305MM;
Note: The height of the tank body can be customized according to the application needs.
Head and tail wheel bearings
Our standard bearings are the PEER UCFT/UCFB200 series, all bearings are precision, rated, permanently sealed, and housed in a cast iron flanged housing with grease nipples.
Head and tail sprockets
The #50 precision chain is equipped with special helical teeth and hardened steel sprockets. The height of the conveyor groove is designed according to the size of the sprockets.
27-tooth chain teeth—-the height of the groove body is 216MM;
40-tooth chain teeth—-the height of the groove body is 305MM;
40 tooth sprocket for high speed and large vertical spiral unloading belt conveyor
Head and tail wheels and axles
The head and tail pulleys are easy to replace thanks to the plug-in mounting, especially in confined spaces. The tapered head and tail pulleys are made of heavy-duty steel and do not drive the belt, so no lagging is required. The steel bushings are processed and welded at both ends. The head and tail axles are made of S45C steel that has been turned, ground and polished, and one end supports the drive to lengthen.
