Stainless steel elliptic pipe roll forming machine manufacturers China for making ellpise tube, oval pipe, flat-oval pipe, stainless steel mushroom tube.
Superda pipe roll forming machine for making Fan-shaped tube, P-shaped tube, grooved tube, oval tube, square pipe, rectangle pipe, elliptical pipe, special-shaped tube and other custom pipe roll forming machine manufacturers.
Stainless steel elliptic pipe, mushroom shape, flat oval tube mady by Supeda roll forming machine.
Stainless steel handrail & ellipse tube & oval tube & mushroom pipe roll forming machine parameter.
| Model | SP-IN4 |
| Motor power | 11KW |
| Reducer | 4000 type |
| Feed material | iron pipe |
| Feeding round tube diameter | 1.5 inch (cun) |
| Forming Roller | 8 forming + 2 straightening |
| Working speed | 10 meters / minute |
| Roller material | Cr12 heat treatment after finishing |
| Spindle material | 40Cr after quenching and tempering |
| Transmission mode | Gear |
Stainless Steel Elliptic Pipe Production Video
Product Features
Steel Round Pipe change into ellipse pipe &flat tube & square pipe ect customized pipe forming machine operation guide
1. Develop safe operating procedures. Do not touch the mold during the operation of the unit. If you need to touch it during work, your hands should be placed in the direction of the pipe. Operators should have fixed positions, not change at will, and keep a record of shifts.
2. Before driving, check whether the lubrication points of the steel square tube forming machine are filled with corresponding lubricants. Pay special attention to the high-speed lubricating grease that is relatively high-temperature resistant to the main shaft of the flying saw. Fill it once every two days, two or three times each time. It should not be added too much. If the heat dissipation is not good, it will cause excessive heating and even bearing dead.
3. The temperature of the welding extrusion is too high. It is recommended to use a synthetic composite aluminum-based grease (SY1414-80) that can withstand high temperatures and use under humidity conditions.
The large hexagonal nut and the upper pull plate should be adjusted at the same time to avoid that the squeeze roller is not perpendicular to the plane of the worktable, which may damage the thread of the squeeze roller. At the same time, pay attention to check the squeeze roller bearings. The working environment here is harsh and the bearings are easily damaged. If abnormalities are found, the bearings should be replaced in time to avoid greater damage.
4. The gear box is lubricated with gear oil with good fluidity, generally 230# gear oil (for reference only due to the difference between north and south). Pay attention to frequently check the bearings of the gearbox of the steel square tube forming machine. Pay attention to the working condition of the gearbox during work. If you hear abnormal sounds, you should check the gearbox bearings in time. Bearing-type wearing parts should be checked. Once damaged, it cannot be repaired in time. It is easy to cause damage to gears, etc., and the loss will be greater.
/uploads726
