Steel Structure Base WH-S90/4
1. Features and advantages
1.Suitable for the installation of steel structure beams, without drilling and welding
2. 4 long strip holes design, easy to install and adjust
3. Designed to improve anti-slip, shear and impact resistance
4. Can be used as a support arm base
5. Depending on the requirements of the working conditions, the single base cantilever arm can be used
6. Applicable to I-beams with flange width ranging from 75-300mm
7. 2 through bolts must be installed crosswise
8. Material carbon steel surface hot-dip galvanizing (zinc layer thickness 55um)
2. single set of accessories
Product name | Specifications | I-beam flange width (B) | Bolt hole spacing (C) | Floor width (D) | Surface | Unit | Amount |
Steel base | WH-S90/4 200 | 75-165 mm | mm 200 | mm 280 | Hot dip | A | 1 |
Steel base | WH-S90/4 300 | 165-235 mm | 300 mm | 350 mm | Hot dip | A | 1 |
Steel base | WH-S90/4 350 | 235-300 mm | 350 mm | mm 430 | Hot dip | A | 1 |
Heavy lock nut | M12 | / | / | / | Hot dip | A | 2 |
Square neck bolts | M12x100 | / | / | / | Hot dip | A | 2 |
Heavy steel beam clamp | M12x85 | / | / | / | Hot dip | Set | 4 |
3. Mechanics Model
|
Specifications |
Bearing capacity |
±Fyrec[KN] |
±Fxrec[KN] |
±Fzrec[KN] |
|
WH-S90/4 200 |
Fy//Fx//Fz |
6.00 |
14.7 |
6.00 |
|
Fy+Fx+Fz |
3.11 |
14.7 |
3.11 | |
|
WH-S90/4 300 |
Fy//Fx//Fz |
6.00 |
10.2 |
6.00 |
|
Fy+Fx+Fz |
3.11 |
Previous :
Extra Heavy Duty(EHD) Fastener and Pistol Tool for Shoes
Next :
Three Phase 4 Wire Digital Kwh Energy Meter
SEND INQUIRY×
To: Steel Structure Base WH-S90/4
Name:
Email Address:
Address:
Phone Number:
Message:
|
