The Supercombinata SC3, thanks to its standard equipment, is suitable to perform internal line boring and internal and external overlay welding within a working range from Ø 62 mm to Ø 800 mm. It’s suitable for drilling and tapping. By means of extra kits, it is suitable to perform external line boring, facing of orthogonal planes, creation of circlips grooves, threading. With additional accessories, the Supercombinata can be adapted to many different needs of our customers.
DIAMETERS
Boring bar diameter: ø 60 x 2200 mm
In line boring: ø 62 – 800 mm
External line boring: Extra kit
Internal welding: ø 42 – 800 mm
External welding: ø 42 – 600 mm
Drilling: Optional accessories
Tapping: Optional accessories
Threading: Extra kit
Facing of orthogonal planes: Extra kit
ROTATION MOTOR
AC motor: Single phase
Power at rated speed: 2300 W
Output torque at the bar: 902 Nm with 55 rpm
1° speed: max 55 rpm (420 Nm)
2° speed: max 85 rpm (235 Nm)
3° speed: max 240 rpm (85 Nm)
4° speed: max 375 rpm (55 Nm)
FEED MOTOR
Gear motor: DC
Power at rated speed: 90 W
Max. speed: 11 rpm
Feed system: Electromechanical
Feed: Manual/Automatic
WELDING TECHNOLOGY
Spiral: Continuous with variable step
Welding machine: Compatible with MIG/MAG welder with EURO connector
LONGITUDINAL STROKE
Unlimited: With 350 mm pitch
ELECTRONIC CONTROL PANEL
Voltage: 220/240 V (50/60 Hz)
Main switch: Available
Emergency switch: Available
Inverter feed: RH/LH
Inverter rotation: CW/CCW
Speed regulator: Rotation/Feed
Electrical absorption: 2300 W
Control panel 110/120 V: Upon request
Digital control panel: Upon request
DIMENSIONS
Length: 680 mm
Width: 300 mm
Height: 390 mm
Weight central unit: 39 kg
STANDARD EQUIPMENT
Qty 1 - Main unit
Qty 1 - Boring machine stand
Qty 1 - Electronic control panel
Qty 1 - Control panel holder
Qty 1 - Cable control panel/machine
Qty 1 - Power cable 220 V
Qty 1 - Boring bar ø 60x2200 mm
Qty 1 - Boring bar extension 520 mm
Qty 2 - Pivot
Qty 1 - Tool holder for boring d. 120-250 mm
Qty 1 - Tool holder for boring d. 250-800 mm
Qty 1 - Tool holder LH ø 12x50 mm
Qty 1 - Special tool holder LH ø 12x60 mm
Qty 1 - Tool holder LH ø 12x60 mm
Qty 1 - Tool holder LH ø 12x80 mm
Qty 1 - Tool holder RH ø 12x100 mm
Qty 1 - Box with 10 cutting inserts
Qty 1 - Adjusting plug for tool holder
Qty 2 - Main bar support
Qty 2 - Additional support
Qty 18 - Bracket for flanges 200 mm
Qty 18 - Bracket for flanges 275 mm
Qty 4 - Flanges support d. 250-800 mm
Qty 1 - Telescopic shaft for welding
Qty 1 - Reduction bushing drawing torch
Qty 1 - Reduction bushing locking torch
Qty 5 - Diffusor extension 35 mm
Qty 4 - Diffusor extension 100 mm
Qty 4 - Short gas nozzle
Qty 4 - Long gas nozzle
Qty 5 - Short contact tip ø 0,8 mm wire
Qty 5 - Long contact tip ø 0,8 mm wire
Qty 1 - O-ring for welding shaft 100x5 mm
Qty 1 - Terminal lance for external welding
Qty 1 - Centring system for through holes d. 250-800 mm
Qty 1 - Centring system for through holes
Qty 1 - Centring system for blind holes
Qty 1 - Telescopic gauge up to ø 800 m
Qty 1 - Dial gauge
Qty 1 - Dial gauge support
Qty 1 - Set of wrenches
Qty 1 - Screws and bolts
EXTRA KITS
BORING REDUCTION
KEP00594 Ø 22 - 44 mm (0,87” - 1,73”)
KEP00593 Ø 32 - 70 mm (1,26” - 2,76”)
KEP00688 Ø 42 - 160 mm (1,65” - 6,30”)
KEP00687 for jobs with KES00186/KES00200
FACING
KES00186* Ø 48 - 255 mm (1,89” - 10,04”)
KES00200* Ø 56 - 400 mm (2,20” - 15,75”)
KES00363 Ø 228 - 500 mm (8,98” - 19,68”)
KES00364 Ø 376 - 800 mm (14,80” - 31,50”) *SC2 / SC3 compatible by using KEP00687
INTERNAL THREADING
KFL00927 Ø 120 - 350 mm (4,72” - 13,78”)
EXTERNAL BORING
KEL00202 Ø 100 - 200 mm - D. 200 mm (3,94” - 7,87”)
KEL00203 Ø 150 - 300 mm - D. 300 mm (5,90” - 11,81”)
BIG DIAMETERS
