Superda electrical box roll forming machine production line for making distribution board, recessed metal board, electrical panel board, control panels, embedded metal cabinet equipment.
Wall mount electrical metal box & distribution board enclosure projector solution
Product specifications: height adjustable 300-1200mm, depth adjustable 150-400mm.
Electrical enclosure Production machine technical parameters
Item | Technology parameter | |
Material | Material | cold-roll strip,galvanized steel strip |
Thickness | 1.0-1.5mm（base on 1.5mm design, when T.1mm effect alittle not good as 1.5mm） | |
Coil Inner | Ф360—Ф510 | |
Process | Form Speed | 0-13m/min |
Length | Not limit | |
Quality | Length Precision | L≤1000mm：±0.5㎜ |
Straight, Deflection | L≤1000mm，Bend no more than 1mm；Deflection no more than 2mm | |
Forming size | As per design | |
Electrical distribution board roll forming machine production line process
Uncoiler→ Straightening→Servo feeder→Hydraulic device→ Guide device → Roll forming machine →Bending device
Distribution box production line technology explaination
This production line is equipment for production of distribution boxes. The strip coil to be processed is manually placed on the uncoiler, and then corrected and tensioned. After leveling, it enters the hydraulic pre-punching and punching notch, and is sent to the forming machine by the guide device to form. Under the frictional damping action of the forming roller and pressure roller, after entering the bending part at a linear speed of 0-13m, the box is cut and bent as required, and then manually packed away. This production line produces 2-3 enclosures per minute. the production box quantity speed according to different product specifications.
Superda Distribution Box Roll Forming Machine Manufacturer
Electric box production line main technical parameters
1.Details of accessory brand
No. | Name | manufacturer |
1 | Encoder | Omron |
2 | Touch Screen | Wienview |
3 | Programmable controller (PLC) | Mitsubishi |
4 | Low-voltage circuit breaker | Chint |
5 | AC contactor | Chint |
6 | Inverter | Mitsubishi |
7 | Hydraulic Solenoid Valve | Shun Xin, Taiwan |
8 | Guide rail | Hiwin Taiwan |
9 | Server System | Mitsubishi |
2.Feeding specifications
a. Applicable materials: cold rolled coil, galvanized coil
b. Material quality: Domestic GB standard
c. Tensile strength: δb≤780Mpa (Max.)
d. Yield strength: δs≤510Mpa (Max.)
e. Material thickness: 1.0-1.5mm
f. Material width: 200-450mm (Max.)
g. Inner diameter of steel coil: Φ360mm-Φ510mm
h. Outside diameter of steel coil: Φ1250 （Max.）
i. Steel coil weight: 3 t (Max.)
3.Forming parameters
a. Number of forming staion: 16 sets of roller
b. Spindle specification: Ø48mm 40Gr quenching and tempering
c. Roller material: Gr12 mold steel heat treatment
d. Integral archway: precision machined from 25mm steel plate, the hole distance error is less than 0.1mm
e. Base plate thickness: 20mm
4, forming ability
a. Outside diameter of coil: Φ1250mm (Max.)
b. Material forming thickness: 1.0-1.5mm
c. Product width 160mm-400mm adjustable
5.Speed parameters of forming unit
a. Linear speed 0-13m / min
b. Acceleration time ＜ 30 seconds
6, Forming accuracy
a. Shear length tolerance: ≤ ± 0.5mm / m
b. Width tolerance: ≤ ± 0.5mm
c. Sickle curve: ≤2mm / m
d. Burr: ≤0.1mm (new blade cutting ordinary carbon steel plate with reasonable clearance)
e. Height tolerance: ≤ ± 0.5mm
The above tolerances are based on the first-grade steel coils with flat and edgeless waves.
7.Other equipment parameters
a. Power supply: 380V / 50HZ / 3PH (Or Custmized)
b. Installed capacity: about 32Kw
c. Forming speed: 0-13m / min
d. Cutting method: forming then cutting
e. Driving motor:
Straightener machine motor 2.2KW
Hydraulic punching 15kw,bending and cutting 5.5KW
Forming host motor 7.5KW
Servo motor 2KW
f. Floor area (approximately): length 30m × width 3m
(Roll Forming 7mX1.5m)
g. Production line direction: from left to right
(facing the unit from the operation table).
h. Equipment color: (Customer choice)
i. Unit equipment design can meet 12 hours of continuous production
j. Operating environment:
1: power supply voltage: 380V ± 10% / three-phase four-wire, frequency: 50HZ total power: about 32KW
2: Ambient temperature: 0-40 ° C, relative humidity: 60-95% RH.
Power distribution box production line devices：
|
No. |
Machine name |
QTY |
REMARK |
|
1 |
Uncoiler |
1 | |
|
2 |
Straightener |
1 | |
|
3 |
Servo Feeder |
1 |
2kw Mitsubishi motor |
|
4 |
Servo Hydraulic machine |
