The TW3320/TW3322 is a high performance antenna covering the GPS L1, GLONASS L1 and SBAS (WAAS, EGNOS & MSAS) frequency band (1575 to 1606 MHz). It features a patch element with 40% wider bandwidth than hitherto available in this format. Unlike its competitors, both GPS-L1 and GLONASS signals are included in the 1dB received power bandwidth.
High rejection SAW filterLow noise LNA: 1dBTemperature compensating LNAs
Great out-of-band signal rejectionExcellent signal-to-noise ratioConsistent response in all operating
temperatures
The TW3322 has an additional tight pre- filter to protect against saturation by high level sub-harmonics and L-Band signals. 预滤波
The TW3320/TW3322 are housed in a through-hole mount, weather-proof enclosure for permanent installations. They are available with either a flat or conical radome in either grey or white. The TW3320/TW3322 is also available with either a TNC or N-Type connector on the base of the antenna or with a flying lead and a variety of connectors. TNC、N-Type连接器等可选。
L-Bracket or Pipe Mount (part numbers 23-0040-0, 23-0065-0 respectively) are available for non-rooftop installation. They are IP67, RoHS, and REACH compliant. 非屋顶有L型支架、管型支架可选。
For further details, please download the Datasheet.
Specifications
Architecture: | Wideband single feed patch |
Size: | 66.5mm diameter |
Weight: | 150g |
Enclosure: | Radome: EXL9330, Base: Zamak White Metal |
Attachment Method: | Through hole (M18 x 1 thread) |
Environmental: | IP67, REACH, and RoHS compliant |
Electrical:
LNA Gain: | 28dB min., TW3320; 26dB, TW3322 |
Supply Current: | 15 mA max. at 85°C |
Supply Voltage: | 2.5 to 16 VDC nominal (12VDC recommended max.) |
Noise: | 1 dB typ., TW3320; 2.5dB typ., TW3322 |
Axial Ratio: | <4dB @ 1590MHz, 8 dB typical at band edges |
For further details, please download the Datasheet.
Drawings