High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion.
HDPE applications, including film, blow-molding, extrusion molding, injection molding, pipes, wire & cable and base material for producing chlorinated polyethylene.
HDPE products use grade :
1). HDPE Film Grade
HDPE film grade is widely used in the production of T-shirt bags, shopping bags, food bags, garbage bags, packaging bags, industrial lining and multilayer film. Also used in beverage and medicine packaging, hot filling packaging and fresh produce packaging and anti-seepage film used in hydraulic engineering.
2). HDPE Blow Molding Grade
HDPE blow-molding grade can be used for producing smallsized containers such as milk bottles, juice bottles, cosmetics bottles, artificial butter cans, gear oil barrels and auto lubricant barrels. It can also be used in the production of intermediate bulk-containers(IBC), large toys, floating matters and large and medium-sized containers such as packaging-use barrels.
3). HDPE Filament Grade
The HDPE filament grade is suitable for making packaging film, nets, ropes and small and medium-sized containers
4). HDPE Injection Molding Grade
HDPE injection-molding grade is used for making reusable containers, such as beer cases, beverage cases, food cases, vegetable cases and egg cases and can also be used for making plastic trays, goods containers, home appliances, daily goods use and thin-wall food containers. It can also be used in the production of industrial-
HDPE cable material | Unit |
|
Mass density | g/cm³ | 0.941-0.959 |
Melt flow Rate(190 Centigrade /2.16kg) | g/10min | ≤1.0 |
Tensile yield strength | MPa | ≥19.0 |
Flexural modulus | Mpa | ≥965 |
Elongation@ break | % | ≥400 |
Impact Embrittlement temperature | Centigrade | MAX -118 |
Dielectric Constant | 100KHZ | 2.32 |
1MHZ | 2.31 | |
Loss Tangent | 100KHZ | MAX 0.0001 |
1MHZ | MAX 0.0001 | |
Volume resistivity | OHM-CM | MIN 1x10 15 |
Application | Mainly used for the production of high toughness of the telephone,cable insulation material | |
use barrels, garbage bins and toys. Through the extrusion and compression molding process and injection molding, it can be used to produce the caps of purified water, mineral water, tea beverage and juice beverage bottles.
