Basic Info.
Model NO.:film grade/injection grade and so on
Material:Polyethylene/PE
Usage:General Plastics, Engineering Plastics, Specialty Plastics
Color:Transparent Withe or Colors
CAS No.:9002-88-4
Density:0.920-0.922
Export Markets:Global
Packing:25kg/Bags
plastic raw material Low Density Polyethylene LDPE
1.LDPE virgin/recycled granules
2.Low Density Polyethylene for film grade
Grade:
1. Blow molding grade,
2. Injection molding grade,
3. Film grade;
4. Extrusion grade.
INTRODUCTION
This material is made from imported LDPE base resin, carbon black and other additives added, screwed by twin-screw extruder.It has good indexes,slender production surface,and high adaptability to circumstances,customers welcome it deeply.Mainly applied in the sheath of communication cable,control cable,signal cable and optical cable.The highest working temperature is 70°C
| Tests | Value | Unit |
| Melt Flow Rate (MFR) | 15 | g/10min |
| Density | 0.922 | g/cm3 |
| Tensile Yield Strength | 7 | Mpa |
| Elongation at Break | 75 | % |
| Wien Softening Point | 85 | °C |
| Packing | In 25 kg PP woven bags | |
LDPE film grade
| Tests | Value | Unit |
| Melt Flow Rate (MFR) | 2 | g/10min |
| Density | 0.9225 | g/cm3 |
| Tensile Strength | 9 | Mpa |
| Elongation at Break | 500 | % |
| Fish eye max(0.3-2mm) | 30 | n/1200cm2 |
| Stripes | 20 | cm/20m3 |
| Packing | In 25 kg PP woven bags | |
