High-efficiency patented technology (US patent) is based on an innovative physicochemical solution, and deep practical knowledge (15+ years) of use of water conditioners for number of applications in various regions and water quality.
Action of the water conditioner is aimed to reduce operating costs, ensure industrial safety and to prevent accidents due to descaling (decalcification). WS is a modern digital device. It’s “brain”, microcontroller, controls operation with several sensors, by a feedback principle.
Work of electromagnetic impulses with variable frequency, transferred to the water inside the pipe with the top efficiency (97-98%) ferrite ring, made from the special ferroalloy, is used to prevent hard limescale deposits and bio-fouling.
Customer can get significant savings from the use of WS water conditioner. It helps to: - minimize energy (fuel) overruns; - reduce non-production downtime; - reduce maintenance costs; - get rid of premature wear and tear of equipment.
Due to: - slower growing of limescale / deposits; - gradual softening and significant removal of existing limescale; - changing of deposit's structure to more porous and soft.
Water conditioner inhibits limescale formation during operation in pipelines, boilers, water heaters, heat-exchangers and protects them from internal corrosion.Device can work together with traditional water softener and without. Feedback examples:
“With WS-62 water conditioner after 3 months no new limescale was found in heat-exchanger. Residual deposits are softened and can be easily removed. Before some pipes inside it were blocked with limescale even after a month after complete cleaning.” - Car parts manufacturer, Russia.
“After two months of WS-62 operation, temperature at the gates heating heat-exchangers output changed from 38-40°C to 57-64°C. Deposits amount on the plates of the hot water heat-exchanger significantly decreased in compare with the previous year.” - Boiler house, Russian Railways.
“Device WS-62 was installed on a “dirty” heat-exchanger, which should be cleaned in one month. The flow was already 54% of the nominal. After 3 months of operation, the flow become 74% of the nominal. Return water temperature become less for 10°C. We see positive dynamics. We keep heat-exchanger working.” - Boiler house, Belarus.
“In 6.35 times more reagent was pumped through the line with flocculating device WS-168F than through the control line. With device noticeably less deposits appeared, and they have a different structure — they are not rigid, loose and porous.” – Deicing reagents factory, Russia.
Specification
Devices for the pipes | d.40 – d.500 and Custom |
Operation mode: | Non-stop |
Pulses: | Batches of pulses with variable frequency and amplitude |
Pulses frequency: | 110-200 kHz |
Maintenance: | Outside of the pipe, no cuts |
Water flow speed: | from 0 up to 2.5 m/sec. Water flow can be variable, start-stop as well. |
Working fluid temperature: | from 4 to 115°C |
Accommodation: | Permanent. Relocation is acceptable. |
Self-control: | Digital display and audible alerts. |
Control: | signal level, temperature, "failure" (overheating, no ferrites). |
Celsius/Fahrenheit version: | Celsius – standard, Fahrenheit - on request |
Personnel qualification for installation and control: | No need special measuring device. Signal level is indicated on a display. |
Pipe length for installation: | 340 mm |
Mains voltage, V: | 90-260 V |
Power consumption: | 3W – 24W (depending of model) |
IP protection: | IP-67 |
Remote control (by request): | Control signal output to operator’s panel |
Please note, listed price is for device WS-40 for pipe d.40 mm.
